Content Wrapper

[Mad-Machine]

It is VERY easy.. hardest part is mounting the lights. The factory stock lights clip into the bumper (I think) so there is no actual mounting pount for non factory lights. I made a metal mount that bolts into the plastic bumper blocks where they meet the body and bolted the hella lights to them. The harness is all right there.. you may have to search for it, but it is there, all looped up and wrapped together in tape to keep it out of harms way. Just but a couple of spade ends into the wires from your lights and push them into the connecter. On the dash side, the switch mounts on the left, pull off the hard plastic part of the dash (becareful, it takes time and has more screws holding it then you think) and take out the blank, push in the factory switch. Once more the harness is already there and connected to the back of the dash where the switch goes. Screw it all back together and you are done!