Quote:
Originally Posted by cclngthr
Josh, I hope you are aware you need to change out the wiring harness and ECU, since the 1.5 motor is MAF based and the early beta 2s are map based. The 04+ beta 2's have the CVVT unit, which that is a all different animal.
My best advise is to get a beta 2 trans as well as the starter. The bell housing and 1.5 block are different (slightly) than the 1.6 which makes parts interchange a little harder.
|
I know that the wiring is different. I am going to get a 1.6 DOHC ecu and used that. I need to rewire the maf to map and i also think I need use the alpha crank sensor. I plan to grab a 01-02 elantra motor, but I need a truck which i dont have so i may have an issue getting the motor. I am not going with CVVT!!!
__________________
2002L 1.5L Alpha. Black, Custom CAI, KYB GR-2 with intrax lowering springs (1.5 front and 2.0 rear), SR front strut bar, 17" ADR rims, Astrel Lip Kit, 2.5 exhaust, B&M short shifter, JDM blk diamond headlights, SR front strut bar, SPEC stage 2 clutch.
http://s237.photobucket.com/albums/f...ptooth_91/Car/
|
