No power to ECU and no CEL, car wont start!!
ok ive been having this same problem for a while now thats been puzzling my local mechanic. About 3 years ago i took the car off the road to put in a new engine, nothing fancy just an exact replacement for the one that was already in it; the 1.5l 12v SOHC. I did the work myself and finished successfully checking all my wire connections. I was confindent it would just start right up but it didnt. Took it to my mechanic who it was the ECU due to the fact that I had no CEL, no spark and when I turned the key to on there was no fuel pump whirr that i remember there being b4, the car will crank all day long but will not catch. so i sent out the ECU to b rebuilt got it back a few weeks later all fixed up and when i put it back in the car, no difference. My mechanic has now been blowing me off ever since it got to this point and im tired of driving by there everyday seeing it sit there and not being able to drive it.
im assuming if there is no CEL than that means sum how the ECU isnt getting power but i checked fuses and tons of wires for continuity which they all have so would it b worth getting the crank position sensor? because besides the previous engine being blown the car ran fine, even the day i pulled it in to the garage to start the work it ran. someone help me! i have a feeling that my mechanic is not going to do anything still so if anyone has any info that could be helpful to me please repost!!!
oh btw everything else electrical in the car works no problem, all interior lights, headlights, radio, everything but the **** engine is working right now!
|
