03 Accent Alarm Help (Tach and Door Pin)

[ftwvampftw]

We have everything hooked up besides the door trigger(pin) and the tach wire.

I've searched for a while now and there are 2 diff wires people are saying to use by the ECM.. white or gray. So which is it? 2003 Accent w/ Tach.

Also for the door trigger, what wire do we hook up for the + positive door trigger(pin) and - neg door trigger(pin).

Thanks!

(if this is moved... which is probable.. please post where its moved to help. Thanks)

[1SickGS]

Not sure what the color is for the door pin. Remove the driver side pin and probe each lead (3 wires if I remember correctly). Attach the negative door pin lead to the hot wire, then reinstall the door pin. That should be all that is required.

Sorry, no help on the Tacho. Trying to find the Tacho info as well.

[ftwvampftw]

Tach is the Gray wire behind the cluster. LIGHT GRAY. There is another one that is dark gray with a black stripe. Thats not it. But for a 2003 Accent its the Gray Wire! YAY.

Now to figure out the damn door pin. I have:

Green wire: Dome light sensing wire (neg input). Connect it to the dome light switch at the driverside door.

Violet Wire: Dome light sensing wire (pos input). Connect it to the dome light switch at the driverside door.

Now does anyone know how to hook those 2 wires up on the accent?
There are 2 wires on the door pin of the accent. One is Green and the other is Green w/ a black stripe.

[Edited by ftwvampftw on Oct 21, 2003 3:07 PM]

[Edited by ftwvampftw on Oct 21, 2003 3:47 PM]