Old thread, but I'm sure newcomers are scratching their heads wondering how to assemble or even find an aftermarket'ish intake for their vehicle without paying out the cornhole.
Spectre [SpectrePerformance.com and SFXPerformance.com]:
9404 4"L 3"OD x1
$11.00
9419 6"L 3"OD x1
$11.00
9499 90D 3" OD x1
$25.00
8771 3" Coupler/Reducer x3
$15.00
9789 Headlight Funnel x1
$6.00
9751 Air Tube Ducting x1
$26.00
8147 Intake Duct Filter Adapter x1
$5.00
8701 Intake Mounting Kit x2
$10.00
Universal [eBay and Home Depot]:
7"D x 5.5"H Intake Heat Shield x1
$15.00
T-Bolt Clamps x6
$8.00
FernCo 3" ProFlex Shielded Coupling x2
$6.00
The plan is a completely straight pipe, 4" from the TB, 90 degree, then the 6", filter with shield, duct adapter, ducting to the left fog-light area and headlight funnel.
The filter will sit in the general area left [from the driver's perspective] of the radiator fan where the first piece of the stock intake would sit.
TIP: I found out that the Spectre Air Intake Mounting Kit sleeves thread PERFECTLY onto the bolts that are sticking up from the stock intake. I'll anchor a piece to the PVC coupler underneath then screw the two pieces together. This will provide a holding/bracket from underneath to prevent sagging.
These Spectre tube sections will give me a greater array of options, like if I wanted to the filter to end somewhere behind lower grill, or even Y it out and add a second filter with a shield back up in the engine bay.
I had a disgusting amount of Bing Cashback and eBay Bucks....and some time [like 2 weeks] until my first son is born, so PROJECT TIME!
Pictures will be posted afterwards.
Linear Mode
