how to install oil catch in scoupe?

[RobinScoupe]

where do the hoses connect?
i have no idea to b honest any help be appreciatted alot. Thanks very much
robinglesk@hotmail.com

[ASperilla]

Oil Catcher you mean Oil Cooler?

What you need is a Oil Samwich
its and adapter with to oil lines,
so you unscrew you oil fileter screw the samwhich on, then screw the oil filter back online then hook up your oilcooler conect lines and your done!

Oil Hyundai's use the sam oil filter so the adapter is pretty generic

[RobinScoupe]

ummm pretty sure i ment oil catch can....
because for one there 2 diff things an i already have oil cooler but thanks anyways


i ment a catch can resievor one wich reduces oil vapour between the block an mani
i know wat they are ment to do but have no clue where on scoupe GT
they connect....anyone who has clue please lket me know...thanks

[cujo8me2]

ok there is a little hose connecting the engine to the air intake....... and i mean little..... basically you take the end that connests to the intake off hook that end to the catch can... then you need another hose to hook on the intake port...... did that help?

[supralight]

Originally Posted by cujo8me2

ok there is a little hose connecting the engine to the air intake....... and i mean little..... basically you take the end that connests to the intake off hook that end to the catch can... then you need another hose to hook on the intake port...... did that help?

you must connect the catch can on the PCV valve piping and not the breather piping.

[cujo8me2]

^^^^^ woah what????????

it should be in the diy