What all is needed for Timing Belt job?

[Black03Accent]

The LC2 is coming up on 60k, so I'm starting to source parts for a timing belt job. What all do I need, and do I need any special tools?

Obviously I need the belt itself, but should the tensioners also be replaced or anything like that?

[newbtastic]

well im not sure its exaclty the same, but on the x3 all you need is a new timing belt i replaced the tensioner too but mine was bent, you probly wont need to. first take the motor mount off that the belt is around(I think thats right, you may not need to do that) then just take accesory belt off, now take off the waterpump pulley. then take the timing belt cover off. once thats done theres the tensioner down there that keeps the timing belt tight. you can probly just slide the belt off of that. then do all that in reverse order. the hardest part for me was getting the new timing belt on. my tensioner didnt want to move all the way up so i had to kinda pry it on there. just be carefull if you gotta do it that way. as i said thats the way i did it on my x3 im sure its close to the same. hope that helps