I recently got an AFC Neo but I haven't been able to find any good information and what i do find seems confusing. i probably found good information but I'm not sure how to use it.
I found:
my ECM ,NOT behind the center console
I'm not sure what kind of sensor type it has...
and I'm not exactly sure which wires to connect because the connection diagram only goes by the sensor type...
ehh please somebody help me, I know a lot more then 1 person has installed it into an American LC
__________________ 01 Hyundai Accent GS
1.6 DOHC Mods: unorthodox racing pulley, SMA 1.5" drop springs, Kspec Front Strut Bar, 20mm wheel spacers, slotted rotors, SharkRacing rear Strut Bar, Bored out IM, FAZE boost/vac gauge, Short ram intake, and an AFC Neo, AEM EUGO Wideband gauge. going turbo
all mods aside, its all about how fun the car is.
Last edited by MetalShark; 05-26-2008 at 03:07 PM.
If you have an LC. Then the ECU you see behind the center console, is not an ECU. It is the airbag module. The ECU sit on the driver side, up behind the fuse kick panel.
ok that makes a lot of sense why all the diagrams didn't match.
have you installed an AFC Neo in the LC?
__________________ 01 Hyundai Accent GS
1.6 DOHC Mods: unorthodox racing pulley, SMA 1.5" drop springs, Kspec Front Strut Bar, 20mm wheel spacers, slotted rotors, SharkRacing rear Strut Bar, Bored out IM, FAZE boost/vac gauge, Short ram intake, and an AFC Neo, AEM EUGO Wideband gauge. going turbo
all mods aside, its all about how fun the car is.
ok well I found it and everything seems to match up, only that its in a really bad place for me to work in, not to mention the wire ball blocking the way. And I'm scared to make a mistake all of the sudden.
do you know what sensor type the LC's ECM is?
and if i could get more of a step by step analysis on how I should do this it would be GREAT. so far I'm seeing the pin out i found on this site.
__________________ 01 Hyundai Accent GS
1.6 DOHC Mods: unorthodox racing pulley, SMA 1.5" drop springs, Kspec Front Strut Bar, 20mm wheel spacers, slotted rotors, SharkRacing rear Strut Bar, Bored out IM, FAZE boost/vac gauge, Short ram intake, and an AFC Neo, AEM EUGO Wideband gauge. going turbo
all mods aside, its all about how fun the car is.
lol i was still confused why no diagram matched up but that would be funny and in a way i would hate myself a lot more after that
__________________ 01 Hyundai Accent GS
1.6 DOHC Mods: unorthodox racing pulley, SMA 1.5" drop springs, Kspec Front Strut Bar, 20mm wheel spacers, slotted rotors, SharkRacing rear Strut Bar, Bored out IM, FAZE boost/vac gauge, Short ram intake, and an AFC Neo, AEM EUGO Wideband gauge. going turbo
all mods aside, its all about how fun the car is.
ok done with that now im looking for NA tuning numbers. all the install information was on this forum. so if anybody tuned the LC with similar mods and is willing to share, please. just for now untill i boost it.
__________________ 01 Hyundai Accent GS
1.6 DOHC Mods: unorthodox racing pulley, SMA 1.5" drop springs, Kspec Front Strut Bar, 20mm wheel spacers, slotted rotors, SharkRacing rear Strut Bar, Bored out IM, FAZE boost/vac gauge, Short ram intake, and an AFC Neo, AEM EUGO Wideband gauge. going turbo
all mods aside, its all about how fun the car is.
Last edited by MetalShark; 05-27-2008 at 02:11 PM.
Does anyone have details and/or pictures of the installation of the NEO? I am going to be doing one this weekend in my 2002 Accent GSi and could use all the help I can get!
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
Afc Neo installation for LC
Linear Mode
