Re: 1995 hyundai scoupe non turbo wanting to swap engine
Yup!......just make sure All the accessories are attached to the ECU & harness, you have the downpipe with MAF, the alloy up-pipe with the idle-controller & that the turbo has it`s ancilliaries all connected etc..
If you want the tacho. & special boost-gauge, you`ll want the dash board!.
Dunno how things are with scrapyards over there, but here they`ve started to dismantle themselves & sell the parts out of computerised racks...."for safety reasons".
You don`t want this....you`ll not get all the bits & pieces!......best to buy the whole car & sell or return what you don`t want!. (The seats are nice!).
Just a friendly warning, if you yourself have not done this type of work before, make sure you have someone available who has experience of modern automotive electro-mechanics; the Scoupe Turbo is an extremely complex vehicle.......my local garage compared it to a Swiss watch!.
Good luck!, Nick.X)
__________________
http://aol.photobox.co.uk/slideshow/index.html?c_album=546423
My mods.(180 crank bhp.) include: cold air induction (with 12v fan & ram air), dump valve, FSE fuel pressure regulator, strut brace, rear (+2.5") spacers, Spax lowering springs & Pedders shocks. Subaru bonnet scoop & upgraded cockpit. Custom 2.5" exhaust with twin 4" tailpipes & 15"x7" alloys . Intercooler fitted + manual boost controller & oilcooler.
|