accent ecu with beta swap question! plz i need fast help with this!

[anthonyfa18]

hey BlackDevil can you do me ECM pinout but for 2003 1.5L(map) accent and 2004 or 2005 2.0L cvvt elantra or tiburon
plz

and by the way do any of you know if i can run this piggy back GREDDY e-MANAGE
ULTIMATE here is a like to it http://www.greddy.com/prod_e_manage_ult.htm

[omgbossis21]

I would also like to add that pin # 47 is a off white color and is the rpm signal wire ;-) I will also post this diagram as it can be very helpful determining colors of wires too coordinate with blacks ecu diagram.

[omgbossis21]

Also pin #12 is not the speed signal as my boost controller displays 0 at all speeds. If anyone knows what it is fill me in please =-)

[anthonyfa18]

hey BlackDevil can you do me ECM pinout but for 2003 1.5L(map) accent and 2003 2.0L elantra plz ???

[omgbossis21]

BINGO! The 98 accent ecu pin # for the speed signal is pin #42.

[omgbossis21]

COMPARISON BETWEEN 98 ACCENT ECU(1.5) VS 2.0 BETA ECU (00 TIB)
PINS :
1-Fuel pump relay, same
2-ISA closing, same
3-fuel injector #1, same
4-fuel injector #4, same
5-
6-ecu ground, same
7-
8-
9-
10-
11-02 upstream ground(accent) signal (tib), switched
12-02 upstream ground (tib) signal (accent) switched
13-
14-maf ground, same
15-
16-
17-
18-
19-
20-
21-
22-
23-
24-
25-ignition coil, 1&4, same
26-
27-MFI control relay, same
28-ecu ground, same, camshaft ground
29-opening ISA, same
30-downstream 02 heating, same
31-fuel injector #3, same
32-fuel injector #2, same
33-
34-ecu ground, same
35-
36-evap purge valve, same
37-upstream 02 heating, same
38-
39-downstream 02 signal (tib)ground(accent) switched
40-downstream 02 signal(accent) ground(tib) switched
41-MAF signal, same
42-Speed signal, same
43-
44-camshaft position sensor signal,same
45-
46-
47-
48-
49-
50-
51-
52-ignition coil, 2&3, same
53-
54-
55-ecu ground, same
56-
57-
58-igntion switch manual trans, same
59-TPS/accelaration sensor/fuel tank power, same
60-reprogramming obdii wire(accent)
61-
62-
63-
64-
65-
66-
67-
68-
69-
70-knock sensor signal, same
71-coolant temp/IAT/knock sensor/tps ground/acel. sensor/fuel

tank pressure sensor, same
72-
73-TPS output, same
74-
75-
76-fuel tank pressure sensor, same
77-IAT power, same
78-coolant temp output, same
79-
80-accelaration sensor output , same
81-
82-Lline obdii,same
83-Kline obdii,same
84-
85-ignition switch auto trans(accent)
86-ignition switch auto trans(tib)
87-
88-


[Edited by omgbossis21 on Dec 19, 2005 6:11 PM]

[charlie31c]

ha do anybody knows if the 00 tib ecu is the same as the 00 elantra ecu

[charlie31c]

well if anybody want 2 know the 99 accent and 00 elantra are the same.

[spikie]

..

[Edited by spikie on Sep 10, 2006 4:38 PM]

[omgbossis21]

No all this info is right or my car wouldnt be running right now. The difference is in the 96-97 accent ecu and the 98-99. This information is correct for the 98-99accents. If any of my information you believe is wrong let me know i will edit the post but everything i have posted is tried and true to the best of my knowledge and i think this NEEDS to stay a sticky.