stock axels for X3 beta tranny swap? - Hyundai Performance Forums

swallowknife · 09-18-2007, 10:06 PM

im looking for the axels ill need after ive pushed the motor to the drivers side 1/2 inch.

i was told that their are some auto axels that will work who knows what thhey are.

mind you this is a BETA II and matching tranny swap.
please tell me what axels i need to find to make it work.
Chase
at least link me to the info

DREROB · 09-19-2007, 12:42 AM

I swapped In a beta 2 with trans into my LC and moved the motor 1/4 inch towards the passenger side. I used an 97/98 Elantra auto axle for the passenger side and a 1.6L LC auto driver side axle for the other.

swallowknife · 09-19-2007, 10:54 AM

awsome, that was the info i needed. thats a bunch. no more questions from me.
awsome response.
Chase
Thanks
Wait, which side of the auto axel did you use from the 98 elantra (the drivers or passengers axel) for the passenger side.
same for
the 1.6 auto u used a drivers side axel for the drivers side in the swap.got it.
just asking if you remember what side axel you took it from on the 1.8 auto for the passenger side, did you take the passenger axel or drivers?

DREROB · 09-19-2007, 11:02 AM

I used the paseenger side from the elantra for the passenger side on my Accent. Also you are using an X3 so I dont know if this will work for you as this is the set up for an LC.