ATTN: Beta Swappers

[TAK82]

it's better than this site..well sort-of..

Ryan's outdone himself..there's ton of info and resource's and DIY's about the beta accent, accent maintenance and he sell's his Custom-made passenger beta motor mounts which are a pita for us to make ourselves..

it's a accent haven..

and ryan, i suggest you do your best to make sure spammer's don't have their way with this newly made site..

i suggest all Registrators have a authentic DOB,state of their Location, their age and a actual photo of their hyundai for once!!

[GLaccent01]

Hello, Ryanolsen, can you please paint my mount BLACK. I will be buying the mount from you in about another week. I'll purchase from your website as well. I definitely need to get my passenger mount fixed, so i can be back in business.

[ryanolson]

yea paintin it black won't be a problem but if you're already swapped i dunno if it will line up with everything.

[GLaccent01]

well ryan the problem is on my swap, the mount was removed from the stock location. the whole engine was moved foward with the mount. The fenderwell was bashed with a hammer and the mount was semi-welded / bolted to that part. It started to crack the frame on the car. So i'm having the guy that did the swap, put the mount back in its stock location and i'm going to buy your mount which will correct the problem. I will also be using a beta transmission. I was told it was off a 99 elantra 1.8L, so i beleive it should bolt up and work just like the 01-03 elantra transmissions. Give me your opinion and let me know if i'm right.

[ryanolson]

good question. i really don't know. with my mount, your other 3 mounts are going to have to be slotted. it might not work with your setup. but if you can't use it just send it back to me. another thing i could do is sell it to you without the urethane in it. that way you could position the center hole wherever you think it would work best.

[GLaccent01]

keep the urethane in there, i think it will be perfect.