how to rewire led lights?

[kobefan]

well i want to remove my front console that is by the radio and the a/c switches and hazard area, but when i try to remove it the led light from my alarm is still attached which is right next to the hazard (the alarm people added an led to show the alarm is activated) well to remove the console part i have to cut the led wires (2 wires) but if i cut it, how would i rewire it back?

any one could help i would greatly appreciate it

Thanks

[pare_john]

Well you will have to splice the wires and reattach them Either with wire connector ar by twisting them and putting electrical tape. I suggest you use connectors

bullet connectors would be your best bet. This way you can easily undo them if you had to remove the console again

[Edited by pare_john on Aug 25, 2003 6:00 AM]

[moosie420]

the led should be conected to the reciever of the alarm. it should just pop out of there.