Like it says I have a harness looking for a auto starter, when there is a manual. So I know I have to link two wires, which ones are they? I always forget this sh!t.
OK here are the pics, the first is the only electrical connector going into my tranny, there are two wires, I'm suposed to link these??? That sounds wrong? So here are my options, there are no plugs that match this one, because the new harness is out of an auto, so it has all these automatic plugs, but I need to know which one to splice the old connector onto. So here they are.
the '2 wires going to the tranny' is your reverse indicator, dont slpice those.
the starter should have one large 8ga wire going to it i believe a plug that i believe needs 2 additional wires (relay +and - i think) to spin up the manual starter.
ive never seen an automatic but i doubt the auto and manual starters are different, i dunno though.
__________________
reminiscing of my LC...
Quote:
Originally posted by solo-baric
[body]
Excellence in all we do. hopefully i pissed him off some more and that would be excellent.
[/body]
yeah dude the manual starters only work on manuals, and the auto only with auto, its a fact proven from us auto to manual guys, I just need to know the pin #s on the transaxle range switch
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
CAR WONT START!!!
Linear Mode
