Hyundai Tiburon Transmission swap Parts list

[Viper966]

i got this from random last night, who just did a swap, its the most comprehensive list ive found so far


Manual tranny Drivers side motor mount (frame side and tranny side)
Manual tranny front and rear roll mounts (tranny side and crossmember side)
Manual Tranny shifter cables.
cable "locks" at each end of the shifter cables (2 for shifter base, 2 for tranny mount)
Manual Tranny shifter base
Manual tranny shifter.
Manual Tranny brake pedal.
Clutch pedal assembly
Clutch Master cylinder assembly
Clutch hard metal hose to Drivers side tranny mount
Rubber flexable hose from drivers side tranny mount to clutch slave cylinder
Clutch Slave cylinder.
Clutch
Pressure plate
Throwout bearing
Flywheel
Flywheel mounting bolts (the ones for the auto torque converter will not work)

[300d50]

Bit of a necro-post, but hopefully it helps someone else out.

You also need the starter for a MT car, since the bendix gear in the auto starter will not extend enough to properly engage the ring gear on the manual flywheel.

An adapter also needs to be fabricated to adapt the AT shift base pattern to the MT pattern.
I have the drawings for the adapter on my desktop machine in case anyone is interested.

Again, sorry for the necropost.

[grimmjustin]

How much to do a swap? That's the only thing I wish I could change.

[zero_gravity]

[grimmjustin]

............?

[DREROB]

Never mind my friend

[blesak]

thanks for all the information guys

[roy2486]

You also want the starter for a MT automotive, since the bendix gear within the automotive vehicle starter won't extend enough to properly have interaction the ring gear on the manual regulator.

An adapter conjointly must be invented to adapt the AT shift base pattern to the MT pattern.
I have the drawings for the adapter on my desktop machine just in case anyone is interested.
---------------
2013 MERCEDES BENZ SL-CLASS