New 4 Cyl Equal Length Tubular Header Pics and Video
Here is the video to show the headers up close and personal. Great growl to em too! HEADERS VIDEO (37MB).
They sound mean as hell. I took a video clip of them, and I cant find the wire to connect my camcorder to the Laptop, so it'll have to wait. I snapped some pics installed on a 1st Gen (with GK exhaust setup). Since it fits this, and I pulled the OEM GK manifold to swap with the Equal Length Header, they should bolt right up to the GK when we get one in the shop for test fitting. Any takers on that?
Here's the pics:
These are a perfect compiment for our Evo Hoods for the 1st and 2nd Gens (96-99, 00-01). With a set of Samco Sport Hoses this would look insane through the vents.
So yeah, screw Hotshot, these will end up costing you guys much less. I'm stoked on the look, and I'm testing them on my 97, and on an 07 or 08 if I can get ahold of one. I need a beta powered socal member to come by the shop to test these headers out. We just want to install them, film it, and take them back off. For the GK these replace the header/Cat combo, and bolt up in the exact place as OEM.
For the RDs we'll need to have the OEM flex pipe extended just a bit so that they meet the bottom flange from the header. Any shop could do this for less than 100 even in the worst case. I'd be people would do the pipe for you for around 30-40 bucks for a whole 20 minutes worth of work. I want these to cost around 300 bucks guys. I'll post pricing when i know for sure, and how many I'll have on hand. I want to sell 100 units, and the GK buyers should really put a dent into that number.
Price should be about 300 a set, which comes with a gasket, and gains should prove at least 9 lbs. of torque with about the same WHP gains, based off my dyno from the original design. I'll get the car on the dyno at APE Motors (where the 10.7 sec Tiburon lives) and see whats up
What is the diameter of the tubes and what is the collector's diameter?
They sound alot better than the ssauto chrome 4-2-1. Better sounding pulse. You should convince them to make headers that are extra long 4-2 or 4-2-1 connecting cylinder exhaust ports 1&3 and 2&4... Make the car sound like it is a flat 4.
Originally posted by jmarc_97_tib
I posted this to show anybody how much potential we have with hyundais, wether they are turbo, N/A or otherwise we can do anything we put our minds to, people are out there doing it as we speak, the people mentioned above are a few of them.
my manufacturer is making me 200 sets, and I'll have my cost per unit in the next day or so. Then they'll be available through FlyRyde.com which is currently being updated to our new software on our new server. I'll set something up though the day we start taking payments. Keep patient, cause when I say they're for sale, I'll have enough for everyone! Figure 300 bucks or so
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
New 4 Cyl Equal Length Tubular Header Pics and Video
and the GK buyers should really put a dent into that number.
Linear Mode
