Auto to 5 Speed Swap!!!!! - Hyundai Performance Forums

2 UNIQ · 01-03-2002, 02:38 AM

OK ive been getting a bunch of emails from different people which are intrested in doing a conversion.My Buddy owns a wrecker yard and i can all the parts needed to make this conversion succesful.
If your intrested into doing this email me back at i6eguy74@hotmail.com and i will list you prices including shipping to your location.DO NOT LEAVE A REPLY ON THIS THREAD SAYING HOW MUCH EVERYTHING WOULD COST.Email me and ill give you details Thanks!!

<hr noshade width=60% size=1 align=left>

ravdav · 01-03-2002, 02:46 PM

how much will it cost :-)

hehe, just kidding 2uniq, you got it done on your car all right didn't you?? how's it working out? did you have pre swap times?

<hr width=60% noshade size=1 align=left>

2 UNIQ · 01-03-2002, 02:54 PM

Ravdav!!
Since i did the conversion ive had no problems at all.Driving from Auto to Stick is like Night an DAY.The best thing that ive done<img src=/images/forums/snitz/approve.gif width=15 height=15 border=0>

<hr width=60% noshade size=1 align=left>

SilkySpinZ · 01-03-2002, 06:29 PM

Hey Rob, your Tib was an Auto before?

<hr width=60% noshade size=1 align=left>Who deleted my signature?

Y2KStreetShark · 01-03-2002, 07:48 PM

Where are you located?? I'd really like to do this.<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>

<hr width=60% noshade size=1 align=left>2000 Jazz Orange Tiburon
KORE Crew 021

AUTOBOT · 01-03-2002, 08:17 PM

So what exactly are you offering?

You buy the parts from a salvage yard then ship them to someone else for a profit?

Why should someone else not just go to the salvage yard themselves to get the parts?

Even if you got a hook up by the time you ship the parts that will wash that out then by the time you make your cut it will probably cost everyone more then just getting the parts themself.

Especially since you are shipping from Canada.

Just currious why you don't list the parts you are offering here and the prices. It should use the same parts every time there fore it should cost the same.

<hr width=60% noshade size=1 align=left><img src="http://www.transfans.com/logospin.gif"></img>I absolutely positively abhor and verbally bitchslap anyone who starts quoting me their entire car mods as some sort of "Stage.~RED~<img src=/images/forums/snitz/wink.gif width=15 height=15 border=0>

NikkiG007 · 01-03-2002, 08:39 PM

thanks autobot, I hadn't realized he's in Canada, I just really emailed him so he can send me a list of what his suggested requirements were, and compare them to the rate I can get from KORE... I'm sorry but this is a hyundai forum to teach and have others learn and understand what you have done to your cars...

<hr width=60% noshade size=1 align=left><img src="http://publish.hometown.aol.com/nikkig007/images/niksig3.jpg" border=0><center>My World</center>

2 UNIQ · 01-03-2002, 09:21 PM

[quote]
So what exactly are you offering?

You buy the parts from a salvage yard then ship them to someone else for a profit?

Why should someone else not just go to the salvage yard themselves to get the parts?

Even if you got a hook up by the time you ship the parts that will wash that out then by the time you make your cut it will probably cost everyone more then just getting the parts themself.

Especially since you are shipping from Canada.

Just currious why you don't list the parts you are offering here and the prices. It should use the same parts every time there fore it should cost the same.

<hr width=60% noshade size=1 align=left>[img]http://www.transfans.com/logospin.gif"></img>I absolutely positively abhor and verbally bitchslap anyone who starts quoting me their entire car mods as some sort of "Stage.~RED~<img src=/images/forums/snitz/wink.gif width=15 height=15 border=0>
[/quote

My Buddy wrks at the scrap yard and thats how i get my parts.Im not here to make a cut just trying to help people out!!!!!

<hr width=60% noshade size=1 align=left>

Zman · 01-03-2002, 09:28 PM

I'm just curious since I drive a manual car. Besides the gearbox and cuts related to pedal instalation, is it necessary to change anything on the engine/admission? The ECU mapping is exactly the same?

<hr width=60% noshade size=1 align=left>Zman

Only the brave tune where there is 45% tax on every car part...

AUTOBOT · 01-03-2002, 09:48 PM

Well I am not trying to get all up in you sh!t but I am currious why you don't post some prices or atleast aproximate prices and why you don't post exactly what is needed.

Like Nikki said we are here to help each other out and if that is all you are doing then post what parts are needed and also some instructions on what you have to do.

I am not against you making a profit for your services but I am curious why you can not post aproximately what the parts will run.

I am guessing no more than $500 US for parts.

Also i understand that you are offering an ECU with the parts. Why? Like Zman said, isn't the ECU mapping exactly the same?

Just trying to gain some knoledge please help me out.<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>

<hr width=60% noshade size=1 align=left><img src="http://www.transfans.com/logospin.gif"></img>I absolutely positively abhor and verbally bitchslap anyone who starts quoting me their entire car mods as some sort of "Stage.~RED~<img src=/images/forums/snitz/wink.gif width=15 height=15 border=0>