Re: 2000 tib tranny problem
sounds kinda like what i had a problem with first is it only when you let off the gas. You may not have to let all the way out for it to disengadge. If so i suspect that it is the large nut that holds on the 5th gear output shaft. the reason this happens is when the nut is loose the gear can move from side to side well when on the gas the gear gets pushed twards a sholder on the shaft, its supposed to be here so no problems. but when you let off the gas the gear wants to be pushed out away from the shoulder due to the angle cut on the teeth of the gear. when this happens it pushes on the shift fork kicking it out of gear. This should be warrantied by the dealer if not its a fix a tranny shop should do. Oh and dont drive the car at this point as when the nut backs out it wears against the outer case of the tranny putting holes in it. you will notice a puddle of oil on the drivers side of the car. Hope its not anything worse.
__________________
me: its a 2.2
uneducated ricer:huh what no way
me: (turns and snickers) wana racer?
|