SharkRacing or B&M Short Shifter

[01Tiby]

Has any one heard if SharkRacings Short Shifter is comparable to B&M's????
I can get SHarkRacing's for $80USD incl. Shipping,
but I wanna know if its worth it or not?......



<hr noshade width=60% size=1 align=left>"AnOthA CiViC BiTeS thE DuSt!"

[RojasTKD]

There is a post about this here somewhere. I recomend a search on the subject.

Basically it's like this.
Both are good. The B&M feels more solid and has a shorter throw, acordering to some one who had both. Also B&M doesn't require any cutting or modification to install.

RC performance products can send it to your door for $128 and some change including shiping. there # is 1-877-472-3278.

Just depends on weather you think it's worth the extra $$$.


<hr width=60% noshade size=1 align=left>Rojas
A Child of the King

[tibmeister]

B&M is worth every cents. No cutting. 10 min to install with a 14mm wrench and a long nose plier.

SR looks like stock. Have spend about 1 to 2 hours of installation if you remember all the parts that you took out. Cutting your base plate may void your warranty.

B&M has a more solid feel to it. Just look at the construction.

When it comes to shifter, B&M is the S**t.

I had cut the shaft 2" of my B&M and it even shifts better. No heavy tension that someone have talked about in the forum. It' just good ol gear jammin going thru gears with a flick of the wrist.<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left>http://communities.msn.com/sanpids/tigztibby.msnw

[mouse]

Please refer to <a href="http://www.hyundaiperformance.com/forums/snitz/topic.asp?t=7903">THIS POST</a><img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>

btw, please lock this

<hr width=60% noshade size=1 align=left>-Mouse

<img src="http://home.mn.rr.com/ryears/custom.jpg" border=0>

Edited by - mouse on 03/19/2002 10:09:10 PM

[AUTOBOT]

locked


<hr width=60% noshade size=1 align=left><img src="http://home.mn.rr.com/autobot/autobot.jpg">