FS- Huge parts list

[cpavli1]

All of these parts are for the 99 hyundai accent. 1.5l g4ek motor
All parts are brand new unless otherwise specified.
MUST SELL, will accept any reaonable offer.
PAYPAL prefered.

Phantom grip LSD

Piston Assembly (connecting rods, scoupe low compression pistons, new wrist pins, total seal piston rings.) Parts have been crytreated for up to 400% increased strength and durability.
Fully assembled ready for installation.

Walbro 255 lph fuel pump.

Light weight underdrive pulley.

MSD ingnition wires.

2 sets of spark plugs. one is one heat range colder than OEM, and the second is 2 heat ranges colder. (for turbo application only.)

SMT 6 piggy back ecu.

3 bar map sensor. (requires custom hookup to the SMT 6)

Oil temp guage with oil filter adaptor for easy installation.

Water temperature guage with upper radiator hose adaptor and a brand new upper radiator hose.

Engine stand. Slightly used.

Brand new timing belt.

Cryo treated headbolts, new head gasket.

KDM clear corners. 2000 miles on them, great condition.

Universal M3 miorrors.

Front and rear strut tower braces. Used.

T-25 turbo from a nissan with scoupe turbo manifold.

I also have intrax lowering springs on the car, KYB struts in the front with about 500 miles on them, and am willing to part anything else off of the car. I also have a completly rebuilt motor that had 4000 miles on it prior to the rebuild, but if you chose not to buy with the piston assembly listed above you will have to do something about pistons. Everything else included.

Tons of other parts I can't remember. ANY REASONABLE price will be accepted!!!

[faithofadragon]

im sorry this aint ebay

you have to post prices

ill give you $150 shipped for the smt - 6

[doc182]

how much for the wires, underdrive pulley and front strut bar (aftermarket right)?
and how much for the clear corners?

[Edited by doc182 on Jun 30, 2005 9:37 AM]

[turbo 97 gs]

dibs on the phantom grip lsd......how much are you looking to get for this? Could i get the part number for the lsd.
Also how much for the clear corners?
thanks

[Edited by turbo 97 gs on Jun 30, 2005 9:38 AM]

[cpavli1]

This is the information on the Phantom Grip LSD.

I will sell $200 WITH the required spring kit. Thats a $330 value, and I will pay shipping cost anywhere in the US.


95-01 Hyundai Accent Trans=Any
Note:
Upgraded spring tuning kit REQUIRED. Details.
Upgraded spring tuning kit available. Details.
905-GOLD $ 299.95 Order

[cpavli1]

$30 s/h included anywhere in the continental US for the clear corners.

[cpavli1]

wires - $30

underdrive pulley $60

Front strut bar $50

ALL TOGETHER - $110 $30 in savings S/h NOT included

[cpavli1]

The SMT is yours for $150 plus $10 shipping anywhere in the US as soon as you reply to this. Or email me at cpavli1@umbc.edu

[cpavli1]

Phantom grip LSD - listed above

Piston Assembly (connecting rods, scoupe low compression pistons, new wrist pins, total seal piston rings.) Parts have been crytreated for up to 400% increased strength and durability.
Fully assembled ready for installation. 4 Pistons assembled for $350

Walbro 255 lph fuel pump. - $100

Light weight underdrive pulley. - listed above

MSD ingnition wires. - listed above

2 sets of spark plugs. one is one heat range colder than OEM, and the second is 2 heat ranges colder. (for turbo application only.) $10 each set

SMT 6 piggy back ecu. - Pending a reply this may be sold @ $150

3 bar map sensor. (requires custom hookup to the SMT 6) $10

Oil temp guage with oil filter adaptor for easy installation. - $20 both pieces

Water temperature guage with upper radiator hose adaptor and a brand new upper radiator hose. $50 All pieces included

Engine stand. Slightly used. - $50

Brand new timing belt. - $50

Cryo treated headbolts, new head gasket. - $60

KDM clear corners. 2000 miles on them, great condition. -listed above

Universal M3 miorrors. - $50

Front and rear strut tower braces. Used. - listed above. $30 each of $50 for both

T-25 turbo from a nissan with scoupe turbo manifold. This comes with the O2 sensor housing. - $350

I also have intrax lowering springs on the car, KYB struts in the front with about 500 miles on them, and am willing to part anything else off of the car. I also have a completly rebuilt motor that had 4000 miles on it prior to the rebuild, but if you chose not to buy with the piston assembly listed above you will have to do something about pistons. Everything else included.

Springs - $150 with front shocks $170

Rebuilt motor minus piston assemblies $200 need address for shipping quote

[meee2yo]

how much on the turbo and manifold. dibs if you accept a reasonable offer, what would be a reasonable offer, 100, 200 or more dollars. with no prices to base off of.

also, how much side play on the turbo and pics would be nice.