FS: LC beta swap passenger motor mount. *pics fixed, price lowered*

[bizzare]

and with the bushing:


and on the car:



Now heres the details of the mount.
-It is made of 1/4 inch wall thickess steel
-It is predrilled to fit the Beta II mounting block
-They were all made by me, using a big ass lincoln arc welder, plasma cutter and the such.
-The bushing is made entirely of polyurathene "window weld", takes about 3 days to cure but is is very strong once it does.


Now, these mounts are exact replicas of the one I made for my LC beta Accent. In this mount there are about 3 years of trial and error motor alignments that ended in busted cv joints and lots of beer. This one will set your motor up nice and square on all planes. Also to note, on my swap there are holes drilled on the passenger side mount bracket about 1/4 inch from the OEM holes, this was to set the correct left to right distance to be able to use accent lenght axles without modyfing any thing.

I would like to get $50 plus shipping for each one.

Paypal to conspirasybrother@yahoo.com, or money orders accepted. I am putting in the bushings tommorow so it will be 3 days before I can ship them out to allow time for it to cure.

Email me with any questions or post them up here.




[Edited by bizzare on Dec 28, 2005 1:24 PM]

[GLaccent01]

do we only need to buy the passenger side mount? i thought we had to place the front mount over a little more too, but if this is the only thing we need to actually get the engine sitting right then let me know

[bizzare]

Well this is the only mount that needs to be fabricated, the rest of them only require drilling holes in the brackets. It is possible to relocate the front roll stop a little, but i just used a spacer to take up the air gap, has held up fine for about 3 years now. Let me know...also i can email you some pics if you would like, the ones I put up on imagestation are having issues, so Ill have to repost them tonight.

[Accent95]

Thats great idea! Would you like to make the other mounts as well for the Tiburon transmission swap too? This would make my life easy, since I plan on doing the tranny swap myself this spring.

[GLaccent01]

what he said ^^, so when i do finally swap a beta in, its a much easier job than it ever was before

[bizzare]

theres nothing really to make on the transmission mounts, just line em up, drill the holes, take a die grinder to some things and bam

[Accent95]

True.

[02slpr]

Can you please send pics to mcelwee_9@hotmail.com

[bizzare]

bump

[bizzare]

bump