Hey everyone! I decided to sell off most of the aftermarket parts on my car. There will be several additions to this thread within the next week (parts posted as they are removed). I have a baby on the way, and need to put some money in the bank to prepare for my little bundle of joy to arrive.
Full RIPP State 2 Supercharger Kit is for sale first. Was on the car for about 8,000 miles before being removed.
This kit was originally purchased from autoaccessorystore.com.
Here is a quote directly from the website:
Quote:
* REQUIRES PERFORMANCE HEADERS TO BE INSTALLED.
* Everything you need to setup a supercharger to be functional is included.
* Designed to bolt up to the 6G72 V6 (six cylinder) 3.0L engine.
* System has had zero engine failures to date.
* Kit will work with auto, manual or tip-tronic.
* Boosts from low RPM’s with NO LAG Time normally associated with turbos
* Professional installation required.
For fuel management we now feature RIPP’s own Black Box tuning computer. A small stand alone piggy back unit that functions as a fuel and timing calibration tool, which turns your stock ECU into a programmable fuel and timing system, fully calibrated to an engine running boost, in both high and low levels. All SDS kits come preprogrammed to give you safe and reliable HP (unless otherwise advertised) all the time, with out the hassle of going to a tuner or the worriers associated with detonation in conjunction with boost.
* RIPP SDS (Supercharger Drive System) 6061 Aluminum CNC designed and fabricated
* RIPP Black Box Preprogrammed** (Fuel and timing controller no out side tuning required at all)
* RIPP 2 Bar MAP Sensor for exact ECU boost communication
* RIPP/Vortech V5 G-Trim Supercharger (VSQ Option)
* RIPP By Pass Valve
* RIPP Boost Cooler Methanol&Water injection
* RIPP Under drive Shaft pulley
* Six 310cc Venom Injectors with clips
* Malpassi Rising rate fuel pressure regulator with gauge
* 2.75” 6061 aluminum piping
* Four Ply silicon hose (Gloss Black Red or Blue)
* Walboro 255 in tank Fuel pump
* All hardware and clamps included
* 2 Part 30 page Illustrated Instructions and tech tips
* Easy 12-15 hour install
* One year warranty included from date of purchase
|
Was never run on the track unfortunately.
Purchased for $5,048.
Selling for $3,300.
Contact Information:
PM Here
IM on AIM - SpadeTechNet
Email -
spade.tech@gmail.com
Please keep this thread clean, if you are interested please contact me using the information above! Good luck all!