I finally decided to retire my Hyundai project. So my loss is your gain. I invested over $7500 in these parts and want to see them go to a good home or rather a good engine compartment. With the right computer you could milk this setup for 300-350HP with 18-20 PSI.
I am offereing all of the following parts for
$4500
I am able to crate everything up and get it ready for transport, but the buyer will have to facilitate a driver or trucking company to pick it up at my location (home) and pay all the fees. This is the worst part about the whole deal.
Pictures on request
I would like to sell everything as a complete package, but in a couple of weeks if there are no takers, I will begin to part it out individually.
HERE IS WHAT IS INCLUDED:
2001 Hyundai 2.0L motor with 15,000 miles.
2000 Hyundai 2.0L 5 Speed Transmission with 20K miles (Hydraulic Clutch)
INCLUDED AND INSTALLED ON THE ENGINE:
Tiger Lilly cast pistons with 8.5:1 compression ratio
detail KSPEC KDM Performance Center
KSport Cast turbo exhaust manifold for T25 Manifold
detail KSPEC KDM Performance Center
Garrett GT2860RS Turbo (real Garrett, not some knockoff)
Garrett GT2860RS (aka GT28RS): atpturbo.com
Siemans 630cc Injectors (4)
HiFlow Injector (630cc) Hi Imp: atpturbo.com
HKS SSQV Blow Off Valve
HKS USA Blowoff Valves
FUEL PACKAGE:
Walboro 255lph External Fuel Pump
Walbro GSL392 Universal High Flow External Fuel Pump 255 LPH
Jegs 15 gallon Aluminum Fuel Cell (Red)
35' Braided AN4 Stainless Steel Fuel Tubing.
External Fuel Filter, Various AN Fuel Fitings.
INCLUDED WITH THE TRANSMISSION:
ACT Clutch - HY1-HDR6 Heavy Duty Pressure Plate and 6 Pad Disc
ACT Product Search | Products ~ Advanced Clutch Technology®
Clutchmasters Lightweight Aluminum Flywheel
Clutchmasters Aluminum Flywheel Hyundai Tiburon 1999-2006 4cyl 2.0L :: Flywheel :: Clutches/Driveline :: UltraRev, Inc.
K&N Cold Air Intake
K&N Cold Air Intakes - World Leader in Performance Air Intake Technology
ALSO INCLUDED:
Aluminum Intercooler (6" x 28" x 4") 2.5" Inlets The intercooler has a few road nicks and a couple fins are bent -It is on of the only lightly used parts in this setup.
New Aluminum Intercooler Piping & Flanges (2.5")
Motor was recently assembled with all new Hyundai Gaskets
Motor has NO Air Conditioning Compressor
Motor has new belts
The only thing mechanically that needs to be done before dropping this motor in your hyundai is to connect an oil supply line for the turbo (included) and tap the oil return line (also included) into the oil pan. It should only take a couple of hours to get this motor ready to be dropped in.
Hyundai 2.0 Turbo Motor and Accessories (Chicago)
Linear Mode
