ON SALE: OBD (OBD-II) Code Readers and Scantools - Jay-M's Gizmoz - Hyundai Performance Forums

Jay-M · 07-13-2007, 10:24 PM

*** On Sale!!! ***

OBD Code Reader and Eraser
(Please click on the pic to enlarge)

- Basic, compact, stylish and lightweight: One button for read and another for clear
- Compatible with all OBD protocols
- Comes with a manual which includes an error code list (For Hyundai vehicles, you can always use Hyundai Service Technology for more details on the error code)
$38 Shipped (North America +$6 for International)

------------------------------------------------

OBD (OBD-II) Scantools
With the use of the right software, these OBD scantools are far more useful than just reading the CEL error code. It is a complete advance diagnostic tool that will look at most or even all of the functions of the car. It is a very handy tuning tool or just something cool to show your friends. Here are some of the readings that you can derive from it: Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). Clear trouble codes and turn off the MIL ("Check Engine" light) Display current sensor data, including:
Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
Fuel Pressure
Freeze Frame data
Continuous and Non-Continuous Oxygen Sensor test results
Data graphing and logging

Single Protocol Scantool - RS232/Serial
(Please click on the pic to enlarge)

- Lightweight, robust, sleek and powerful
- Connects to a computer's Serial Port or RS232 (USB Version is now available for another $21. Please let me know if you are interested or check it's details below vvv)
- This unit powers up through the OBD diagnostic port with bi-coloured LEDs showing power and the current logic status
- I will personally include the 3 (or more of the) best softwares that I've found very useful in a CD
**Very Important Note:**
This unit is will only work with ONE OBD protocol (PWM, VPW or ISO) . By default, I will be sending the ISO protocol unit (Hyundai vehicles and almost all of the imports uses this). Please let me know if you need a unit for a different protocol. For more information regarding vehicle protocol and compatiblility, please visit this link
I have limited stock of the ISO units due to it's demand, i apologize for this inconvience.
$65 Shipped (North America +$10 for International)

ISO Protocol Scantool - USB
**New housing design**(Please click on the pic to enlarge)

**Very Important Note:**
This unit is only available in the ISO protocol (Hyundai, Most Asian and European manufacturers use this)
Here is a LIST (<---click here) of vehicles that utilizes this protocol
- same features Single Protocol Scantool - RS232/Serial but it utilizes USB
- very compact design and very lightweight
- the USB and the OBD connector(s) has been directly integrated into the unit (less wire clutter)
This is great for fellas here with a laptop that doesnt have any serial port available. Due to the demand of these units I also have limited quantities, i apologize for this inconvience as well
$90 Shipped (North America +$10 for International)

Multi Protocol Scantool Unit - Serial, USB or Bluetooth
**New housing design** This is how the new Multi Protocol Scantool - Serial looks like now... (click on the pic to enlarge)
- very compact design and very lightweight
- the USB and the OBD connector(s) has been directly integrated into the unit (less wire clutter)

- Same features as the previous unit (Single Protocol Scantool) except, it is more powerful! It is compatible with all of the OBD (OBD-II) protocols (all vehicles)
- I will personally include the 3 (or more of the) best softwares that I've found very useful in a CD
- Connects to a computer's Serial Port or RS232 (There is USB version is available for another $37 or a Bluetooth version for another $68 Please let me know if you are interested)
This is my personal favorite because i can get it to work with virtually all of the vehicle that i need to tune or diagnose. This is the best choice if you have different cars or will be buying another.
Serial - $118 Shipped (Anywhere in North America +$12 for International)

This is exactly the same unit as scantool.net is selling http://www.scantool.net/products/product_i...;products_id=21 (just different cosmetics) but cheaper (shipping and handling are already included)
also available in:

USB - $149 Shipped (Anywhere in North America +$12 for International)

Bluetooth - $180 Shipped (Anywhere in North America +$12 for International)

------------------------------------------------

Payment and Shipping Information
I can take Money Order, Western Union or Paypal (preferred!). My paypal address is jay_m05@yahoo.com
I ship through Canada Post Expedited Service (with tracking) for North American shipments and it usually takes a week and a half or less (depending on your location) for your package to arrive. For International shipments, I use Canada Post Small Packet Airmail Service and it will usually take a week and a half (depending on your location) for your package to arrive.
I have these units on hand (except if its otherwise noted) and I ship out right away after the payment clears

Warranty, Returns and Exchanges Policy:
- There is a 1 (one) year warranty against manufacturers defect on these units. I will replace your unit with another!
- In an event where you have decided to exchange for another unit or a better model (upgrade), It has to be within 30 days from the receipt of the package. The unit has to be clean, no damages or scratches, in good working condition and all of the cables, packaging and software disk are present. You will have to pay for shipping and handling both ways (plus the price difference for the newer/better model, if you have decided to upgrade). Please understand that these are hard costs.
- If you are not satisfied or just having a hard time getting it to work with your car/laptop and finally just giving up for any reasons at all, i can do refunds. It has to be within 30 days from the receipt of the package and you will have to pay for the shipping and handling since these are a hard costs. The unit has to be clean, no damages or scratches, in good working condition and all of the cables, packaging and software disk are present

If you have any questions or concerns just let me know or read more about OBD here On-Board Diagnostics - Wikipedia, the free encyclopedia to fully understand these units

Thank you so much.. Please let me know if you have any questions or concerns...

- Jay-M

Jay-M · 07-13-2007, 10:36 PM

Pictures/Screenshots of of these units in action:
*Note(s)*
These are ACTUAL pictures and screenshots from my own car(s) and others. I have tested and "played" around with these units personally.

OBD Code Reader/Clearer:

Easy to use, very simple procedure:
Once you see the CEL on...
- Plug in the code reader into the OBD port, hit READ
- The code reader will flash the code 3 times. Once you see the code, look it up in the manual booklet or webtech to identify it
- Diagnose/troubleshoot and fix the problem
- Hit the Clear button to erase the code

OBD Scantool(s):

EasyOBD Software (Included in the CD-ROM) Screenshots
(please click onthe pic to enlarge)

(More pics on the next thread)

I deliberately introduced an OBD error (CEL) - EasyOBD Software

Scantool.Net Software (Included in the CD-ROM) Screenshots

(More pics on the next thread)

ScanMaster Software (Included in the CD-ROM) Screenshots:

Digimoto Lite Software (Included in the CD-ROM) Screenshots:

OBD DIAG (Included in the CD-ROM) Screenshots:

Jay-M · 07-13-2007, 11:06 PM

COM Port Settings:

(based on tanc's thread here... Need Help With Obdii Scantool Interface **update** - RDTiburon.com here are some more additional info about the com port settings)
there are two ways to change the com port # of your rs232 or serial port, that i know of... one is windows based and the other is dos..
since, i windows is the least complicated one, here's how it goes:
Go to the Control panel, then to the System Menu, then to the Hardware Tab, hit the Device Manager button, scroll down to Ports (COM & LPT), select Port settings (here you could change your bit rate), then click the Advanced button, and there you go! you can change your com port #'s from here.
Also while your are on this menu.. try leaving "FIFO" selected and Set the recieve and the transmit buffers to lowest setting. Then save your settings

USB Scantool COM Port Settings:

(based on drivingtibnaked's settings)
On the USB multi protocol scantool. The com ports and programs will function the same with the rest of the scantools.
Most of the software will work right away. Some of them stalled or something the first time around and I changed my USB port, restarted and got all but some of the experimental programs to work.
These are my com port settings first time plugged in everything worked correctly. Right click my computer, click manage, device manager, ports (LPT and COM), then select the USB Serial port.
Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: none
Advanced:
Com port number: com4
Receive (bytes): 4096
Transmit(bytes): 4096
Latency timer(msec): 16
minimum read timeout (msec):0
minimum write timeout (msec):0
In all your programs select COM4, 9600, search around and see if there is an option for "ELM" and select that one. Leave any other settings as they are. This should work for everyone

Also, if anyone has "questions" regarding Digimoto, PM me

-----------------------------------------------

Reviews and Comments from my Customers:

please refer to my RDTiburon thread for more info: Fs: Obd (obd-ii) Code Readers And Scantools (price Reduced!) - RDTiburon.com and
SALE: OBD (OBD-II) Code Readers and Scantools.. Great Prices, Service and Support - NewTiburon.com Forums

Supercow:
"just to put in some experience with these, I bought the 2nd one off jay a while back and it works great! You can read all kinds of info and buying one of these units at autozone or someplace like that is alot more expensive and is capable of a lot less."

tibby01:
"good prices man.
i have the single protocol ISO scantool.net reader hooked up to my carpc and it works great."

Bboyitim:
"Good prices keep getting better! Thanks for the PM's. Very efficient."

Kantizuni
"Got my OBD interface in the mail today! w00t!
Gonna test it out on my laptop tonight/tomorrow.

"

2000CoupèFX
"I recieved mine today. Looking really good. I don't have a chance to test it right now , cause I'm really sick.
Thanks a lot man."

DrivingTibNaked
"Bump for customer satisfaction!
These code readers are invaluable tools and at a very good price.. You spend $150 for a USB model here, that does everything the $200-$500 hand-held model at Autozone does, but this one is on the computer. You can also have access to all kinds of information that the hand-held $2-500 models don't, like 1/4th mile times and dyno charts. You can also post your error codes/sensors data online by using screen shots.
Seriously people. Take advantage of this great deal Jay-M is giving us. This tool will not go out of date any time soon, it can be used on yours or your buddy's car or the guy who breaks down outside your house, they're small, lightweight, and come with a lifetime supply of burritos.

Disclaimer: Jay-M, DrivingTibNaked, and ELM units have nothing to do with a lifetime supply of burritos. You can purchase your lifetime supply of burritos at walmart with the money you saved from not going to tuner shops."

tanc:
"After getting everything sorted out, the obd programs and unit runs like a charm.
I'd recommend these to anyone who wants to read every sensor their car has. ;P"

Frozen:
"got the usb obd tool, works great!"

KeWLKaT
"I got it off Jay-M on RdTib. This thing is wonderful.
I got the multi-protocol version which means it should work with 99% of cars with OBD-II in them."

"112$ It's a steal!
It's even cheaper than most handheld models that only give you trouble codes"

Arcy
"Got mine a few weeks back, had a few interface problems, Jay was able to get me the right info to get that straightened out. Thing has helped a lot compared to running around trying to find a place to get a code read if you don't have an Autozone."

pr16vturbo
"I ordered the USB OBDII ISO Scanner Tool and it arrived in about 5 days. The included software is excellent and his customer support has no equal. I Highly recommend Jay-M"

mikysee
"I bought the Single Protocol Scantool - RS232/Serial. I have a serial to usb cable and that connected directly to the scanner and works great. The software is good too. Shipping was fast and very good service."

Devine151
"bought one of these great service and shipping was fast! unfortunatly i can not tell you how good they work because i traded in my tib 2 days before it came in the mail but GREAT service and support would buy from again and would recomend to anyone!"

Nu7s
"My OBD Code Reader and Eraser and Multi Protocol Scantool USB Unit arrived yesterday. I was completely suprised by these products. For that price they have it all. They are made out of quality materials and very robust.
I strongly suggest anybody who hasn't bought one already to open paypal and send the money within the next 10min. the price is absolutly amazing for the quality of the products and the possibilities are endless... Top product for a amazing price! 100% customer satisfied!"

... and many more....

KeWLKat’s thread and video clip:

http://www.elantraclub.com/forum/index.php...topic=14600&hl=
OBD-II Scantool Module Installed! - ElantraXD.com

YouTube - OBD-II ELM Scantool Test