Hyundai Forum: Hyundai Performance Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
187 Posts
Discussion Starter #1
is there any other spark plug wires that you can get besides the ones on this site is there any honda civic wires that can be used? i have a hyundai accent 1.5l soch.
 

·
Registered
Joined
·
621 Posts
Ngk has some for the 95-97 accent 1.5L not sure if they are the same.
NGK wire set # XE77


Elantra wires work on Lc2. I have some check them out, just a bit long.
NGK wire set # XX90
Check both wire sets one of them should work.





[Edited by inferredrecords on Jan 10, 2006 1:44 PM]
 

·
Registered
Joined
·
1,040 Posts
alex, i would like to know that answer as well..... anyone?
 

·
Registered
Joined
·
737 Posts
make your own like I did for free with any 8/9 mm wire
just get the correct ends and crimp everything together
the design of the 1.5 wires is very simple compared to the 1.6 wires which go through the valve cover as opposed to just popping on the plug above the exhaust manifold

if you can't make your own wires you can use the magnecore and msd makes a nice set
my philosophy for this motor is why waste money on expensive wires and plugs when all it needs is cheap plugs and cheap wires to run just as well. If you want the look of them I suggest the msd ones because they are very nicely made(connectors and such).
 

·
Registered
Joined
·
384 Posts
I got Nology off of Ebay. They took forever to get here and I thought I was getting jacked, but they came.

They have their own grounding wires. You can kind-of see them in the pictures on this thread
http://www.hyundaiperformance.com/forums/topic.php?t=67461
 
1 - 8 of 8 Posts
Top