Hyundai Forum: Hyundai Performance Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
43 Posts
Discussion Starter · #1 ·
does any one have them? where did you get them? how much were they? did you notice a difference?


<hr noshade width=60% size=1 align=left>www.geocities.com/projectgs/

CARPEDIEM
 

·
Registered
Joined
·
541 Posts
1.6L cams? Is this new? I heard about 1.8L and 01 Elantra cams being of a little assistance, but never 1.6L cams.




<hr width=60% noshade size=1 align=left>"Even in death we live!"
 

·
Registered
Joined
·
5 Posts
I have them and they kick ASS!! (of course mine might be machined....)...

I think that they are the same as the 1.8L<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left>-Tasos-
 

·
Registered
Joined
·
38 Posts
Hi guys again...
NO Tasos is talking about 1.6ltr <b></b>BETA CAMS<b></b> and not Alpha cams.Here in Greece,HMC used to sell the Coupe(Tiburon)with the 1.6ltr Beta and not the Alpha.I am planning on putting the 1.6beta cams for awhile.Afterwards i am going to put KENTCAMS fron GreatBritain.Those are very wild cams with 265degrees duration and 10.5mm depth.Also i am going to decrease the compression to 10,7:1 and polish the cylinderhead.Maybe in that way i shouls approach 200horses,hehehe<img src=/images/forums/snitz/smile.gif width=15 height=15 border=0><img src=/images/forums/snitz/smile.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>
 

·
Registered
Joined
·
6,344 Posts
But jibber, the original poster, was asking about 1.6L alpha cams. ;)

How about RPW/Phantom Racing or HVE? I know they make cams for the 1.6L, cause I asked them.


<hr width=60% noshade size=1 align=left><b>KORE Crew #19</b>

"It's not the contest between racers that really matters, but the abstract dialogue between the soul of a racer and his machine." -Racer X
 

·
Registered
Joined
·
38 Posts
Sorry i didnt know he was referring to 1.6cams.No big diff though compared to 1.8 elantra gt cams...<img src=/images/forums/snitz/smile.gif width=15 height=15 border=0><img src=/images/forums/snitz/smile.gif width=15 height=15 border=0><img src=/images/forums/snitz/smile.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>
 

·
Registered
Joined
·
6,344 Posts
No one that I've talked to has. They arent exactly cheap at $1000+, NOT including shipping from Korea.

[Edited by skierd on Mar 6, 2003 8:35 AM]
 

·
Registered
Joined
·
788 Posts
Wouhou finaly !!!!!!!! http://www.sharkracing.com/Hyundai/alphacams.shtml
yes finaly Cams fort alpha DOHC they say for 1.5L but may i reming you that 1.6 dohc alpha and 1.5L alpha HAVE the SAME engine HEAD ;):

but at 730us i'm shure you can find a shop that will do some custom ones for you :puzzled:

but they are sold without springs,valve or retainers ? does this mean that spirng stock are good enough ? and that we don't need retainers ? :puzzled::puzzled:

[Edited by BarMan on Mar 7, 2003 8:37 PM]
 

·
Registered
Joined
·
232 Posts
DAMN IT BUT NOT FOR THE SOHC ALWAYS ALL FOR THOSE DAMN DOHC S*IT:mad::mad::mad::mad::mad:
 
1 - 13 of 13 Posts
Top