Joined
·
12 Posts
I emailed gaugepods.com about having A- piller gauge pods developed for my Tiburon. This is what they wrote:
The first step s to get us an OEM pillar for evaluation. Then, if it looks
like we can form the pillar on our machines, we will build a mockup pillar
from the OEM pillar for you to test-fit for proper angle and position of
the pods. After the mockup is aproved, you send it back along with 20
prepaid orders. We will then fabricate the mold and manufacture the
pillar.
Regards,
Lyle Simons
Lo-Tek Engineering WWW.GAUGEPODS.COM
So here it is guys. I need nineteen more people who could use this to email me or post responces to this. He didn't state a price but I wouldn't think it would be more than $40 USD each.
<img src=icon_smile_big.gif border=0 align=middle><img src=icon_smile_big.gif border=0 align=middle> HondaEater <img src=icon_smile_angry.gif border=0 align=middle>
The first step s to get us an OEM pillar for evaluation. Then, if it looks
like we can form the pillar on our machines, we will build a mockup pillar
from the OEM pillar for you to test-fit for proper angle and position of
the pods. After the mockup is aproved, you send it back along with 20
prepaid orders. We will then fabricate the mold and manufacture the
pillar.
Regards,
Lyle Simons
Lo-Tek Engineering WWW.GAUGEPODS.COM
So here it is guys. I need nineteen more people who could use this to email me or post responces to this. He didn't state a price but I wouldn't think it would be more than $40 USD each.
<img src=icon_smile_big.gif border=0 align=middle><img src=icon_smile_big.gif border=0 align=middle> HondaEater <img src=icon_smile_angry.gif border=0 align=middle>