[Turboman]

Hi again i am very unhappy today because i think i have an a-spec tib.I noticed that in the front left fenderwell(where i was planning to put the filter of my cai)there is a vapor canistor or sth,which means no space if i wanted to buy the new kore cai!!
So guys does anybody else has this problem??And if so what have you done with your cai´s???


<hr noshade width=60% size=1 align=left>

 

[KAO]

Hey
Me two get a speedstate intake if you have a 5speed! If you have an auto you will have to get the speedstate intake for the auto when it comes out!<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left>

 

[shogun]

I a 97 Tib. auto and have the same problem. Just build your own it's ALOT cheaper<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>and it's not hard to do<img src=/images/forums/snitz/smile.gif width=15 height=15 border=0>

 

[Turboman]

Hi KAO,
Is the speedstate cai any good?What about sound?And approx.what gains did you have?Ive read that when you increase the airfilter´s dist.from the throttle body you lose acceleration.Also what about the dumpvalve?I think its useless..


<hr width=60% noshade size=1 align=left>

 

[maurice]

SAVE your self some time an pain,.. I see a few people taking the cheap way out and Trying to "rig" or make a CAI. Save a couple of buxks , Don't go out to the bars, and buy a real CAI! I know that it is harder ffor autos, but you could try waiting a while unitl some one comes out wiht one. Or you could remove the box and put a cone type filter on the fronthe MAF sensor housing and this would increase your throttle response.



<hr width=60% noshade size=1 align=left>Apex springs,BSA rims,Toyo tires,AOS intake, UR Crank Pulley, grape shooter, OBX Fr strut bar, Shark clear corners, APC gauges. KORE wires,.. blah,.. blah, blah, kICKER 12" AND AMP.
Body kit soon, and hopefully Catcams?

 

[Turboman]

Hi Maurice i dont drive an auto,secondly i have already put a filter on the mafs but it sukcks hot air when the engine gets normal temps...
The only prob.is the vapor canistor in the fenderwell(left front wheel)


<hr width=60% noshade size=1 align=left>

 

[Brendan]

The Speedstate CAI is decent, it was made to fit all tibs 97 to 2001, and possibly the 4 cyl 2002/2003 as well. It's a rather quiet CAI to but it has a nice growl.


<hr width=60% noshade size=1 align=left>http://webhome.idirect.com/~trini