Hyundai Forum: Hyundai Performance Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
436 Posts
Discussion Starter · #1 ·
Aussie Pink Floyd

I have a Weapon R intake with the V2 filter. I want some type of CAI so I bought an 8foot peice of 4" wide aluminum dryer hose. I saw the K&N CAI and they ran their hose where the intake is behind the factory lower grill. I don't understand how they did this b/c there is no room? I ran mine behind the radiator next to the lower radiator hose and came out where the plastic splash guard below the engine is. I cut a hole and pulled the hose out and smashed it down where air is being forced in. I also noticecd that K&N didn't attach their hose to the filter and stressed on leaving it exactly 4inches away???? Anyone played with this type of install that can give me some suggestions???<img src=/images/forums/snitz/finger.gif width=33 height=15 border=0><img src=/images/forums/snitz/smile.gif width=15 height=15 border=0><img src=/images/forums/snitz/laugh.gif width=15 height=31 border=0><b></b>


<hr noshade width=60% size=1 align=left>
 

·
Registered
Joined
·
324 Posts
I made my CAI out of 2.5" flexible exhaust pipe. Go to your local parts store and get it there, $8.00 is what I paid. Where I bought it, it was sold in a 17" chunk which was the perfect length. My runs all the way down to the bottom of the radiator and the filter rest against the lower radiator hose and the fender. I cut a section of that plastic splash guard out so I would get more airflow. Randoms CAI is the same thing as mine, but he has his wrapped. Hope this helps you out some <img src=/images/forums/snitz/wink.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>Custom CAI
2 1/4" exhaust w/carbon fiber racing muffler
Tornado Air, Plugs and Wires, Breather Filter
Indaglo Gages, Color changing dash
Custom white racing stripes
 
1 - 2 of 2 Posts
Top