Hyundai Forum: Hyundai Performance Forum banner

1 - 20 of 23 Posts

·
Registered
Joined
·
177 Posts
Discussion Starter #1
It looks like the AEM cold air intake will be out later this year but it only list that it will fit 2000-2001 Tiburons....

Whats up with that!? i thought the 97-01 had the same exact engine??

Any know whats up with that ? <img src=/images/forums/snitz/oogle.gif width=15 height=15 border=0>


<hr noshade width=60% size=1 align=left>Ready....Set....NEXT!?!??!?
 

·
Registered
Joined
·
176 Posts
It will probably fit 98-2001 without a problem. The first batch of 97's have a canister in the fenderwell that interfere with the MHP and the Kore gen1 intakes, so you either have to modify the intake or get a different one if you have an early 97 model Tiburon. Otherwise they will work.

Oh yeah, AEM is not done with the intake for the Tib yet. <img src=/images/forums/snitz/wink.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>
 

·
Registered
Joined
·
16 Posts
Just so all of you know the intake isn't the only thing being made by aem for us. They are also making the fuel rail, pullies, and all the other "normal" things they make for all the other cars. That was the words right of the techs mouth. Sounds like somebody got some interest in Hyundai.<img src=/images/forums/snitz/smile.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>
 

·
Registered
Joined
·
8,316 Posts
Guess what car and what site got them interested <img src=/images/forums/snitz/approve.gif width=15 height=15 border=0>.

They were gawking at the new Tib quite a bit during the SEMA show, and I was BSing heavily with them as much as possible. Even Steph Papadakis took a chance to sit in the new Tib. <img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left>"Hey, if my prize is your foot up my arse... its still a prize.... " - <b>WhoopOi</b>

<a href="http://shop.hyundaiperformance.com">Shop.HyundaiPerformance.Com</a>, your one-stop shop for Hyundai performance parts (coming soon)
 

·
Registered
Joined
·
176 Posts
Sweet. Not bad. I was going to E-mail then to see when they were coming out with the other items like the fuel rail, regulator, pulleys, etc. but I could not find one on their site. Does anyone know what it is? Last time I called them about the intake, they said it would be coming out late February, early March time frame. Will it be available in a polished pipe? Hope so.


<hr width=60% noshade size=1 align=left>'00 Tiburon: APC Altezzas, SR clear corners, ATH grill, Volk TE37's on Toyo Proxes T1S, APEX Racing Kit coil-overs, MSD DIS-2, Magnecors, Densos, Weapon-R intake, 2.25" exhaust w/ L' Hayame muffler, and more to come.
 

·
Registered
Joined
·
541 Posts
You can get an AOS intake and pulley at www.speedstate.com

I think they have the Unorthodox one too


<hr width=60% noshade size=1 align=left>"Even in death we live!"
 

·
Registered
Joined
·
176 Posts
All racers and import tuners know that AEM makes the BEST CAI's. They tune each individual intake on a dyno to achieve the maximum HP obtainable via that CAI for each car.


<hr width=60% noshade size=1 align=left>'00 Tiburon: APC Altezzas, SR clear corners, ATH grill, Volk TE37's on Toyo Proxes T1S, APEX Racing Kit coil-overs, MSD DIS-2, Magnecors, Densos, Weapon-R intake, 2.25" exhaust w/ L' Hayame muffler, and more to come.
 

·
Registered
Joined
·
612 Posts
<BLOCKQUOTE id=quote>quote:<hr height=1 noshade id=quote>
All racers and import tuners know that AEM makes the BEST CAI's. They tune each individual intake on a dyno to achieve the maximum HP obtainable via that CAI for each car.<hr height=1 noshade id=quote></BLOCKQUOTE id=quote>

I believe HP.com will be dynoing ALL of the Intakes for the Tib. The numbers WON'T lie!


<hr width=60% noshade size=1 align=left><img src="http://www.mustangmods.com/publish/sundin/cujo.jpg">
GO LEAFS GO!!!
 

·
Registered
Joined
·
103 Posts
<BLOCKQUOTE id=quote>quote:<hr height=1 noshade id=quote>I believe HP.com will be dynoing ALL of the Intakes for the Tib. The numbers WON'T lie!<hr height=1 noshade id=quote></BLOCKQUOTE id=quote>

when are they planning on doing that??
 

·
Registered
Joined
·
7 Posts
Someone on the SR site mentioned that Random is doing a dyno on all CAIs available for the Tibs, this will be in the next few weeks.<img src=/images/forums/snitz/wink.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>The open road is my domain.
My car is the bridge that connects me to a temporary utopia from the harsh reality of dull driving.
 

·
Registered
Joined
·
7 Posts
Ok..my apologies.....It's Rob here at hp that is hosting the test. Random is just going to accompany him.

Again...my apologies Rob. <img src=/images/forums/snitz/uhh.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>The open road is my domain.
My car is the bridge that connects me to a temporary utopia from the harsh reality of dull driving.
 

·
Registered
Joined
·
996 Posts
kick azz i wanted an AEM intake <img src=/images/forums/snitz/smile.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>"CRAZY LIKE A FOX"
 

·
Registered
Joined
·
103 Posts
i noticed on a different post, a site said that the AEM intake had a diameter of 2.5 inches. this is, to my knowledge, the same diameter of the KORE auto intake. i am not, however sure about the bends in it and whether it will fit an auto tib. having an auto myself, i'd be interested in it. anyone know about this??
 

·
Registered
Joined
·
1,893 Posts
The intake is not out yet, so no one knows what diameter or what it will fit yet.

You'll just have to wait like the rest of us.<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left>quote from 4DoorGL: "Told you. Random is cool as hell in person, even if he is a dick on the net <img src=/images/forums/snitz/wink.gif width=15 height=15 border=0> (j/k)"

Leave it to Random to Needlessly complicate things.
 

·
Registered
Joined
·
177 Posts
Discussion Starter #18
Huh? since when can you order from AEM direct?

The only thing i see is its listed under the Applications section but it also has TBA next to it which means its not out yet <img src=/images/forums/snitz/wink.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>Ready....Set....NEXT!?!??!?
 

·
Registered
Joined
·
74 Posts
i know first posts usually consist of a newbie askin a question 'bout their ride but...

i just spoke to an AEM rep. the intake will be out by end of april to mid may at the latest.

BTW i was FSTBUBBLE back on FXtreme. Finally got my own computer so i can start playin online again. <img src=/images/forums/snitz/smile.gif width=15 height=15 border=0>

Random's name loox familiar. thats about it. what happened to fxtreme. Bear with me, ive been out of it for like a year and a half. If anyone remembers me, holla back! <img src=/images/forums/snitz/cool.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>aka FSTBUBBLE
- 2000 TIBURON 5-SPEED
APC Intake
CLA CatBack Exhaust
- 1995 MAXIMA SE 5-SPEED
K&N Popcharger
 

·
Registered
Joined
·
176 Posts
Whoa! Long time no speak!!!
Glad you could make it over here now! <img src=/images/forums/snitz/smile.gif width=15 height=15 border=0>

I'm still around, so is Red, Digital, Stocker, and a few others using their original names from FXtreme.


<hr width=60% noshade size=1 align=left>
 
1 - 20 of 23 Posts
Top