Hyundai Forum: Hyundai Performance Forum banner
41 - 49 of 49 Posts

· Registered
Joined
·
580 Posts
hi 4g63t,
i understand the turbo elantras can get pretty squirrelly at full throttle. do you have any driveline mods to help keep the car in a straight line, like LSD or something else?
someone told me there's an equal length axle kit available to lessen the torque steer, but it doesn't make sense to me that such a kit could exist. either the axles are equal or they're not. if they're not, i don't see how some kit is going to make it so. thanks.
 

· Registered
Joined
·
1,206 Posts
Discussion Starter · #43 ·
Mine does toruqe steer somewhat but it's not that bad. The problem I did have was the weight transfer to the rear, but I corrected that buy installing a set of coil overs in the rear.



<img src="http://www.speed-factor.com/turbo2_small.jpg" border=0>

AT 14psi HOLD ON TO YOUR SEAT, IT"S GONNA BE A WILD RIDE !!!!

H to the izzO N to tha DA silly ricer you just got beat by a HYUNDAI!!!!

For Pictures Visit http://www.speed-factor.com/hyundai4g63.html
 

· Registered
Joined
·
13 Posts
Originally posted by Hyundai4g63T
[body]
and that is about it, the project is easy but you have to have some good mechanic skills and under stand all the vacum lines and where they need to go, but I can help you out in that department also if needed I can post a Diagram on how the Vacum lines should be hooked up and exactly where they need to come off of on the Intake manifold.



HAPPY BOOSTING <img src=icon_smile_big.gif border=0 align=middle><img src=icon_smile_big.gif border=0 align=middle><img src=icon_smile_big.gif border=0 align=middle><img src=icon_smile_big.gif border=0 align=middle>

<img src="http://www.speed-factor.com/turbo2_small.jpg" border=0>

AT 14psi HOLD ON TO YOUR SEAT, IT"S GONNA BE A WILD RIDE !!!!

For Pictures Visit http://www.speed-factor.com/hyundai4g63.html
[/body]
Do you think you could hook me up with that diagram for the vacum lines and stuff thanks
 
41 - 49 of 49 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top