[2 UNIQ]

OK ive been getting a bunch of emails from different people which are intrested in doing a conversion.My Buddy owns a wrecker yard and i can all the parts needed to make this conversion succesful.
If your intrested into doing this email me back at [email protected] and i will list you prices including shipping to your location.DO NOT LEAVE A REPLY ON THIS THREAD SAYING HOW MUCH EVERYTHING WOULD COST.Email me and ill give you details Thanks!!


<hr noshade width=60% size=1 align=left>

 

[ravdav]

how much will it cost

hehe, just kidding 2uniq, you got it done on your car all right didn't you?? how's it working out? did you have pre swap times?


<hr width=60% noshade size=1 align=left>

 

[2 UNIQ]

Ravdav!!
Since i did the conversion ive had no problems at all.Driving from Auto to Stick is like Night an DAY.The best thing that ive done<img src=/images/forums/snitz/approve.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>

 

[SilkySpinZ]

Hey Rob, your Tib was an Auto before?


<hr width=60% noshade size=1 align=left>Who deleted my signature?

 

[Y2KStreetShark]

Where are you located?? I'd really like to do this.<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left>2000 Jazz Orange Tiburon
KORE Crew 021

 

[AUTOBOT]

So what exactly are you offering?

You buy the parts from a salvage yard then ship them to someone else for a profit?

Why should someone else not just go to the salvage yard themselves to get the parts?

Even if you got a hook up by the time you ship the parts that will wash that out then by the time you make your cut it will probably cost everyone more then just getting the parts themself.

Especially since you are shipping from Canada.

Just currious why you don't list the parts you are offering here and the prices. It should use the same parts every time there fore it should cost the same.




<hr width=60% noshade size=1 align=left><img src="http://www.transfans.com/logospin.gif"></img><b>I absolutely positively abhor and verbally bitchslap anyone who starts quoting me their entire car mods as some sort of "Stage.~RED~</b><img src=/images/forums/snitz/wink.gif width=15 height=15 border=0>

 

[NikkiG007]

thanks autobot, I hadn't realized he's in Canada, I just really emailed him so he can send me a list of what his suggested requirements were, and compare them to the rate I can get from KORE... I'm sorry but this is a hyundai forum to teach and have others learn and understand what you have done to your cars...


<hr width=60% noshade size=1 align=left><img src="http://publish.hometown.aol.com/nikkig007/images/niksig3.jpg" border=0><center><b>My World</center></b>

 

[2 UNIQ]

So what exactly are you offering?

You buy the parts from a salvage yard then ship them to someone else for a profit?

Why should someone else not just go to the salvage yard themselves to get the parts?

Even if you got a hook up by the time you ship the parts that will wash that out then by the time you make your cut it will probably cost everyone more then just getting the parts themself.

Especially since you are shipping from Canada.

Just currious why you don't list the parts you are offering here and the prices. It should use the same parts every time there fore it should cost the same.




<hr width=60% noshade size=1 align=left>http://www.transfans.com/logospin.gif"></img><b>I absolutely positively abhor and verbally bitchslap anyone who starts quoting me their entire car mods as some sort of "Stage.~RED~</b><img src=/images/forums/snitz/wink.gif width=15 height=15 border=0>
[/quote

My Buddy wrks at the scrap yard and thats how i get my parts.Im not here to make a cut just trying to help people out!!!!!


<hr width=60% noshade size=1 align=left>

 

[Zman]

I'm just curious since I drive a manual car. Besides the gearbox and cuts related to pedal instalation, is it necessary to change anything on the engine/admission? The ECU mapping is exactly the same?



<hr width=60% noshade size=1 align=left>Zman

Only the brave tune where there is 45% tax on every car part...

 

[AUTOBOT]

Well I am not trying to get all up in you sh!t but I am currious why you don't post some prices or atleast aproximate prices and why you don't post exactly what is needed.

Like Nikki said we are here to help each other out and if that is all you are doing then post what parts are needed and also some instructions on what you have to do.

I am not against you making a profit for your services but I am curious why you can not post aproximately what the parts will run.

I am guessing no more than $500 US for parts.

Also i understand that you are offering an ECU with the parts. Why? Like Zman said, isn't the ECU mapping exactly the same?

Just trying to gain some knoledge please help me out.<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left><img src="http://www.transfans.com/logospin.gif"></img><b>I absolutely positively abhor and verbally bitchslap anyone who starts quoting me their entire car mods as some sort of "Stage.~RED~</b><img src=/images/forums/snitz/wink.gif width=15 height=15 border=0>

 

[AUTOBOT]

Ok well I did find out that you should get the ECU but please answer my other questions.<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left><img src="http://www.transfans.com/logospin.gif"></img><b>I absolutely positively abhor and verbally bitchslap anyone who starts quoting me their entire car mods as some sort of "Stage.~RED~</b><img src=/images/forums/snitz/wink.gif width=15 height=15 border=0>

 

[WIGGLE]

So how much for a 5-Speed to Auto Conversion.... I don't wan't to do one, I just thought I'd be a dick and ask....<img src=/images/forums/snitz/uhh.gif width=15 height=15 border=0><img src=/images/forums/snitz/uhh.gif width=15 height=15 border=0><img src=/images/forums/snitz/uhh.gif width=15 height=15 border=0><img src=/images/forums/snitz/uhh.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>I Drive a 9 second car... give or take a few seconds...

 

[Shadohh]

You do not need a new ECU for the manual, thats worthless


<hr width=60% noshade size=1 align=left><img src="http://www.deedlit.org/pwrbyhonda.jpg" border=0> <bumper sticker> "Powered by HONDAS! I eat them every time"

 

[AUTOBOT]

I just got that info from Rob but he was not sure.

I am still wanting to know the price or why you don't want to give it on here.


<hr width=60% noshade size=1 align=left><img src="http://www.transfans.com/logospin.gif"></img><b>I absolutely positively abhor and verbally bitchslap anyone who starts quoting me their entire car mods as some sort of "Stage.~RED~</b><img src=/images/forums/snitz/wink.gif width=15 height=15 border=0>

 

[Shadohh]

Let me add more, A new ECU is not needed

The ECU and the TCM are two different devices with in the car, the TCM transmission contorl unit is what deals with the automatic and is a seperate device, the only thing is really does, is report to the ECU wether it is broken or not.


<hr width=60% noshade size=1 align=left><img src="http://www.deedlit.org/pwrbyhonda.jpg" border=0> <bumper sticker> "Powered by HONDAS! I eat them every time"

 

[2 UNIQ]

If anyone is intrested in thiis conversion please let me know!!
I spoke with my buddy and said this whole conversion comes complete.
We are talking about
Tranny with low milage
Cltuc,pressure plate bearing,clutch pedal,brake pedal,all clutch linkages,reservoir,and shifting linkages shifter plate,axles there are more parts but no many to list.You will also get Bolts ,nuts etc!!
An Ecu is needed but that will be also included in the price.It would be a good idea to keep because you have an extra ECU and you can get a chip or reprogram it without your car being out of comsssion.
THE price will be $800US-$850US plus shipping.
Autobot you mentioned that everything should cost about$400US?You cant even get a tranny with shipping for that price.Trannys usually go for $600 or more plus shipping.Call around some scrap yards and see.
Who ever is intrested let me know!!!


<hr width=60% noshade size=1 align=left>

 

[2 UNIQ]

Sorry meant to say an ECU is NOT neded as they are the same!!<img src=/images/forums/snitz/smile.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>

 

[Shadohh]

$850? WHy did you qoute me $1300 ?

And yes, i can get the whole enchilada fro about $400-$500. guess thats what hook ups are for.


<hr width=60% noshade size=1 align=left><img src="http://www.deedlit.org/pwrbyhonda.jpg" border=0> <bumper sticker> "Powered by HONDAS! I eat them every time"

 

[2 UNIQ]

I quoted you $1200-$1300 which is with shipping included.If you read my post i said $850 PLUS SHIPPING!!
Since you say you can get it cheaper than by all means GO FOR IT!<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left>

 

[ravdav]

hey 2uniq, how much will it cost?


<hr width=60% noshade size=1 align=left>