Hyundai Forum: Hyundai Performance Forum banner

21 - 31 of 31 Posts

·
Registered
Joined
·
1,080 Posts
are you talking about the picture for the Tibby pinouts? that is a very old style of ECU hook up and so it will not be the same.

as far as the one drerob has for the LC, I don't really think anyone knows....try it?
 

·
Registered
Joined
·
1,787 Posts
are you talking about the picture for the Tibby pinouts? that is a very old style of ECU hook up and so it will not be the same.

as far as the one drerob has for the LC, I don't really think anyone knows....try it?
Yeah I figured as much, oh well I guess I gotta go to the dealer on this one. Also whats a "10) torque reduction signal 0.3W/B (tcm)" ? Saw it for the 1.5-1.6 pinout.
 

·
Registered
Joined
·
1,965 Posts
Discussion Starter #24
Updated with ecm plug breakdown, someone please sticky this.
 

·
Registered
Joined
·
1,965 Posts
Discussion Starter #25
Post # 2 LC Accent pinout now includes LC2's
 

·
Registered
Joined
·
1,965 Posts
Discussion Starter #26
07 MC Accent 1.6L manual added
 

·
Registered
Joined
·
2 Posts
re hyundia accent 1.3 ecu and cam position sensor

my ecu is send 11.33v on pin number 79 is this correct I thought it should be 3 or 5v

I presume this is the pin for the cam position sensor ?

hyundia accest 1.3 year 2001

regrads

kimon
 

·
Registered
Joined
·
2 Posts
2008 Elantra ECM Pinout

Hey guys, I found a copy of the service manual, here is the pinout if anyone needs it:

2008 ELANTRA

1) power ground
2) battery voltage after ignition switch
3) power ground
4) battery voltage after main relay
5) ECM ground
6) battery power
7) Ignition coil (1, 4)
8) Ignition Coil Shield
9) MAF sensor ground
10) MAFS

12) Immobilizer ground
13) APT input
14) ECTS ground
15) ECTS input


18) IATS


21) Knock sensor ground
22) Knock sensor signal input
23) TPS power

25) Injector 1 control output
26) Injector 3 control output
27) Injector 4 control output
28) Injector 2 control output
29) Ignition Coil (2, 3)



33) FTPS signal input
34) FTPS ground


37) OTS ground
38) Ho2S B1S2 signal input
39) Ho2S ground
40) OTS signal input
41) TPS signal input
42) TPS ground
43) VS+ cell voltage
44) VS IP common ground
45) Ro Rp pump cell voltage
46) RC (compensative resistance)
47) APT ground +5V
48) FTPS sensor power (+5v)




53) Vehicle Speed signal input



57) APT ground


60) A/C switch ON signal input

62) A/C thermal switch signal input
63) Fuel consumption signal output (trip computer)
64) Main relay control output
65) Cooling fan relay [Low} control output
66) CVVT Oil Control Valve control output
67) Purge Control Solenoid Valve control output

69) Immobilizer lamp control Output
70) Fuel Pump relay control output


73) Battery voltage supply after main relay
74) Alternator load signal input (alternator)
75) Immobilizer com line

77) CAN [HIGH]
78) CAN [LOW]
79) CMPS ground
80) CMPS signal output
81) CKPS ground
82) CKPS signal output

84) Clutch Switch signal input

86) Engine speed signal output (dash)
87) A/C compressor Relay control output
88) Cooling Fan Relay [high] control output
89) ISCA OPEN control output
90) ISCA CLOSE control output
91) Canister Close Valve control output
92) Malfuntion Indicator Lamp(MIL)
93) Heated Oxygen Sensor HO2S B1S1 heater control output
94) Heated Oxygen Sensor HO2S B1S2 heater control output
 
21 - 31 of 31 Posts
Top