[freddy_00_69]

Whats up everyone, i just got questions that i need answers for. Hyundai 4g63T, since you know alot about what i am trying to do, can you help me. Would i need a performance chip for my car specifically or could i use the eclipse chip for the motor you got just like the 94 eclipses and talons. Also, where would you recommend me getting an adjustable fuel pressure regulator b/c there are some expensive ones and there are cheaper ones. Hdk has one for $200 and B&M has one for a 95 eclipse for $70, that is big difference for two adjustable fuel regulators. Why would one be so much higher than the other if there job is the. I know the settings for the psi range differently in some but the prices are different. Let me know some info if you can help. Thank everyone. <img src=icon_smile_shy.gif border=0 align=middle><img src=icon_smile_question.gif border=0 align=middle>

 

[Turbowgn]

Well as for the Computer you have to look at your ECU and see if it is an EPROM ECU I will post some pics up of both EPROM and NON EPROM ECU's.

As far as the FPR it depends on how much you want to spend and also what do you need it for(i.e. FI,or N/A) answer that question for me and then I can tell you your options on what to go with.



<img src="http://www.speed-factor.com/turbo2_small.jpg" border=0>

AT 14psi HOLD ON TO YOUR SEAT, IT"S GONNA BE A WILD RIDE !!!!

For Pictures Visit http://www.speed-factor.com/hyundai4g63.html

 

[Turbowgn]

Here is a picture of an EPROM ECU
<img src="http://www.tmo.com/howto/ecu1g/EPROMmarked.jpg"border=0>


Here is apicture on an NON EPROM ECU
<img src="http://www.tmo.com/howto/ecu1g/noEPROMmarked.jpg" border=0>



<img src="http://www.speed-factor.com/turbo2_small.jpg" border=0>

AT 14psi HOLD ON TO YOUR SEAT, IT"S GONNA BE A WILD RIDE !!!!

For Pictures Visit http://www.speed-factor.com/hyundai4g63.html

 

[freddy_00_69]

Hey 4G63, well i have to check which type mt ecu, probably today, and i will let you but thanks for the pics cause that will help me alot. The AFR i wanted for the mods i have and will be getting. I am putting nos in it probably in september. Now i got a 2 1/4 cat-cack, exhaust, custom cold air intake, nology spark plugs, accel wire set, spiralmax twister, and i will be getting soon my Hdk header and my big besto throttle body. With those mods i would want a good AFR and run good psi for them. Let me know!

 

[freddy_00_69]

And The TURBO once i get the $$$ and the parts for it.<img src=icon_smile_big.gif border=0 align=middle>