Hyundai Forum: Hyundai Performance Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
74 Posts
Discussion Starter #1
i was just wondering if it was possible to take the orange reflector out of the front turn signal markers in a 2001 tib


<hr noshade width=60% size=1 align=left>
 

·
Registered
Joined
·
218 Posts
You have 2 buy clear corners. SR sells them for I htink $70, HDK AutoSport sells them for $60. I juss put them on my car 2day, they look hot. Next to change is the bulbs.


<hr width=60% noshade size=1 align=left>2001 red Tibby
Alpine CD head unit
Pyle 600watt Amp
2 10" Rockford Subs
Altezza tails
red LED's in bumper

more mods soon...
 

·
Registered
Joined
·
424 Posts
i have the SR clear corners and they look good.
as far as can you take the orange out or not ... i tried with my old corner housings and failed miserably. i tried what the honda guys do by taking a blow dryer and heating up the seam where the clear plastic meets the black housing itself and all i accomplished was tearing the clear plastic and having bits of it stuck to the black housing and finally cracking it.
 

·
Registered
Joined
·
747 Posts
you need some tools.....Flat Head and a Hammer :)

stick the screw driver in, slam the hammer(but do not crack the outside lens) and the stuff will eventually break from the housing.....
the far corner is hard to get to so you need to get a SMALL flat head and BEND it...crack that piece off, then keep hammering with flat head until the pieces fall out it self....It will create some scratches in the housing but I like it since it's not TOO bright...


<hr width=60% noshade size=1 align=left><img src="http://members.aol.com/mysilvertiburon/images/tiburon%20mst%20(s).jpg" border=0>
 

·
Registered
Joined
·
324 Posts
MySilverTiburon, can you do that with the 97 Tibby's corners


<hr width=60% noshade size=1 align=left>Custom CAI
2 1/4" exhaust w/carbon fiber racing muffler
Tornado Air, Plugs and Wires
Future Mods:
BBTB, Header, Custom Wheels

Save a tree, eat a beaver!!
 

·
Registered
Joined
·
218 Posts
The clear corners are alot much easier. I had some trouble installing them, I had to remove 2 screws in the wheel well and get under the car and push the lenses out from under hte car. It was kinda a pain in the a§§ but for that they look pretty damn good. Instead of going through all that werk with the hammer and screwdriver, u may end up breaking the lens and have to end up gettin the clear corners neway. Juss saying.


<hr width=60% noshade size=1 align=left>2001 red Tibby
Alpine CD head unit
Pyle 600watt Amp
2 10" Rockford Subs
Altezza tails
red LED's in bumper

more mods soon...
 

·
Registered
Joined
·
13 Posts
clear corners as far as I know are the same as the 97-98 Sonata's and 97-2001 tiburon's, is that correct?


<hr width=60% noshade size=1 align=left>
 

·
Registered
Joined
·
1,170 Posts
What kind of bulbs you guys using?

Kinda funny, as I just got back from the rice shop just now. I have Sylvania Amber bulbs and PIAA Xtreme white bulbs. Couldn't decide which one to go with. Clear corners are on their way....Should be here next week.


<hr width=60% noshade size=1 align=left><img src="http://publish.hometown.aol.com/jrh382/myhomepage/elantraborbets1.jpg?mtbrand=AOL_US" border=0>
2000 Hyundai Elantra GLS (Photochop)
-PIAA 1100 series driving lights
-PIAA Plasma Headlights
-10" Pioneer sub powered by Kenwood 600 watt amp
 

·
Registered
Joined
·
218 Posts
I just replaced my turn signal bulbs with APC Hyper White bulbs in my HDK clear corners, they look pretty good.


<hr width=60% noshade size=1 align=left>'01 Cardinal Red Tibby
Alpine CD head unit
Pyle 600watt Amp
2 10" Rockford Subs
Altezza tails
red LED's in bumper
HDK clear corners
APC Hyper White turn signals
more mods soon...
Indiglo gauges soon...
Indiglo pedals soon...
 

·
Registered
Joined
·
2,754 Posts
I have the piaa bulbs in my corners <img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left><img src="http://www.gifs.net/animate/kitty.gif"><img src="http://members.aol.com/redsharky2k1/images/coche.bmp">
it does not do to dwell on dreams and forget to live
 

·
Registered
Joined
·
1,170 Posts
I got the PIAAs too. So now it should match the PIAA H4 bulbs I have in the headlights.


<hr width=60% noshade size=1 align=left><img src="http://publish.hometown.aol.com/jrh382/myhomepage/elantraborbets1.jpg?mtbrand=AOL_US" border=0>
2000 Hyundai Elantra GLS (Photochop)
-PIAA 1100 series driving lights
-PIAA Plasma Headlights
-10" Pioneer sub powered by Kenwood 600 watt amp
 
1 - 11 of 11 Posts
Top