[mraccent2000]

I'm looking for clear or altezza tail lights and clear fort lights for my 2000 accent with no luck any help would be greatly appreciated.<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr noshade width=60% size=1 align=left>

 

[954dooR]

Try sharkracing.com for taillights, and for clear headlights, you can do that yourself, easliy. Take the headlight off the car, with a screwdriver and a hammer, beat the pis out the amber plastic piece until it falls out of its spot, then break it to pieces and pull it out the side marker bulb hole.<img src=/images/forums/snitz/moon.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>A message to the honda camp, we're coming.

 

[mraccent2000]

thanks for the reply i have another ? after i pound the hell out of the orange lens and reve it in little pices do i need to get colerd bulbs or are the factory ones colered


<hr width=60% noshade size=1 align=left>

 

[Rudy]

factory ones should be colored.


<hr width=60% noshade size=1 align=left>my car is yellow. [email protected]
you should never underestimate
the predictability of stupidity.

 

[954dooR]

The factory ones are amber. Dude, before you go kill that piece of plastic, try to get a paper towel underneath it so you don't really scratch the **** out of the housing. When i did it, i used a flathead to break it in half, then used a small screwdriver to kinda force it out of its spot. Then i got the needle nose pliers out and ripped that bitch up. <img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left>A message to the honda camp, we're coming.

 

[I am gay]

<i>edited by: rudy</i> don't start this ****.

 

[Nackers]

I couldnt do that with a screw driver and when i was trying i accidently dropped the whole headlight assembly and the amber plastic came out of its spot and was easy to break up after and i didnt really scratch my mirror stuff
so <img src=/images/forums/snitz/finger.gif width=33 height=15 border=0> {i just wanted to do that}


<hr width=60% noshade size=1 align=left>Brian Vrchoticky

 

[954dooR]

Well when i did mine, i was trying to get the headlight off the car, and it was jammed, so i just tugged harder, and it came out, and i fell flat on my ass, and dropped the light. I got a nice bruise, and my headlight got a very attractive scratch.<img src=/images/forums/snitz/laugh.gif width=15 height=31 border=0>


<hr width=60% noshade size=1 align=left>Viva la Evolution.

 

[Nackers]

Ha! Thats funny. Did you end up getting the corner out?<img src=/images/forums/snitz/guns.gif width=33 height=16 border=0>


<hr width=60% noshade size=1 align=left>Brian Vrchoticky