Hyundai Forum: Hyundai Performance Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
147 Posts
Discussion Starter · #1 ·
I wanna replace my thermostat but i was told to flush the cooling system to for some reason...anyways on the 1,5L sohc motor were is the bolt to drain the coolant from the motor at and what are the procedures im gonna try to do it myself in a week PLZ HELP!
 

·
Registered
Joined
·
3 Posts
all i do is open the drain on the rad, cut a small radhose and install a "T" in it where you can hook a hose into. then a will run the hose through it and pinch off both sides of the "T" at the hose to get the water flowing in both directions. do this until it runs clear.
 
1 - 2 of 2 Posts
Top