Hyundai Forum: Hyundai Performance Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
How do you remove the corner lamps? i found the screw, but what else must you do to remove those? i can't find any bolts of screws anywhere after that.....by the way....it's a 2001 tiburon we're dealing with here...thanx y'all...and God bless

P.K.


<hr noshade width=60% size=1 align=left>
 

·
Registered
Joined
·
1,170 Posts
Thats the only screw. The reason why it wont come out is because it has a "snap in" type piece holding it in. You really have to pull it. It will eventually come out. But be careful not to snap anything. Its only cheap plastic. Use your right hand to pull out the front and your left hand to push out the back. This is how I did mine. Mine is an Elantra, but I think the set up is the same. Maybe someone else in here has a better idea on how to get it out....but thats what worked for me.

As far as light bulbs. BE SURE you put in the bulbs while the corner is out and then plug it into the lamp BEFORE you put it back. If not, you have to either take the battery out or move it because it blocks off that section unless you want to take the corner out again. Remember, this is for an Elantra, so it may be different for you, although the engines are the same, compartments may vary.

Good luck <img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left>2000 Hyundai Elantra GLS
-PIAA 1100x superwhite foglights
-PIAA Plasma headlights
-Sharkracing clear corners w/ amber bulbs
-Deflector
-10" pioneer subwoofer w/ 600 watt Kenwood amp
-Blue dome light
 

·
Registered
Joined
·
218 Posts
They are a pain in the a§§ to get them snap thingies out. I cut my hand up doin that shyt.


<hr width=60% noshade size=1 align=left>'01 Cardinal Red Tibby
HDK Clear Corners
APC Altezzas
APC Hyper White Turn Signals
 
1 - 3 of 3 Posts
Top