Hyundai Forum: Hyundai Performance Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
114 Posts
Discussion Starter #1
hey guys, and girls,
-
i am new here, and i thinking of buying this " Neeper 5-O's in good condition. Very minor curb scuff on one rim. Carbon fiber look on center caps scuffed. 5 lug 120 mm diameter bolt pattern"
-
it's a 16 or 17 in version i believe. It's a 5 lug, i don't know if this could fit the tiburon, could anyone help me and tell me what i should do to fit it?
please hurry,
thanks


<hr noshade width=60% size=1 align=left>
 

·
Registered
Joined
·
218 Posts
I belive your Tib uses only 4 lugs, since I have a Accent (4 lugs) and using Tib rims.


<hr width=60% noshade size=1 align=left>
 

·
Registered
Joined
·
114 Posts
Discussion Starter #3
yeah i think it's a 4 lug pattern too, but could you still a 5 lug pattern on with a unversal lug convert or something?


<hr width=60% noshade size=1 align=left>
 

·
Registered
Joined
·
218 Posts
Im not sure about converters or anything like that. It might put the rim too far away from the hub and cause rubbing on fender. You might do a search for that since Im sure someone has asked the same question and I am no expert in wheels and tires. good luck tho.


<hr width=60% noshade size=1 align=left>
 

·
Registered
Joined
·
1,474 Posts
the tib uses a 114.3- 4 lug pattern. There are some rims that are 4 and 5 lug patterns, but if the rim is only a 5 lug pattern, then there isn't much you can do.

hope that helps a little


<hr width=60% noshade size=1 align=left><img src="http://www.hyundaiperformance.com/upload/crochunter.jpg">
<b>Croci, look at the size of the wamdingo!</b>
<a href="http://Shop.HyundaiPerformance.Com">Shop.HyundaiPerformance.Com</a>, your one-stop Hyundai performance store (coming soon)
 

·
Registered
Joined
·
152 Posts
<BLOCKQUOTE id=quote>quote:<hr height=1 noshade id=quote>
the tib uses a 114.3- 4 lug pattern.... <hr height=1 noshade id=quote></BLOCKQUOTE id=quote>

I've heard that people refer to bolt pattern as 4x100, and something like that. Are you refering that the Tiburon is 4x113.4??<img src=/images/forums/snitz/uhh.gif width=15 height=15 border=0><img src=/images/forums/snitz/uhh.gif width=15 height=15 border=0>

Also, the pattern, size and offset of the Tiburon is the same for Elantra isn't it?



<hr width=60% noshade size=1 align=left>Zman
OK, I didn't buy the site...
 

·
Registered
Joined
·
6,117 Posts
4x114.3 is usually referred to as "4 on 4 and a half". It is actually 4x4.5 inches. The other common 4 bolt size is 4x100mm. Many aftermarket rims have eight holes because they're drilled for both patterns.


<hr width=60% noshade size=1 align=left>Later,
Aaron Britt
Events Coordinator, Las Vegas F-body Assoc.
'97 Trans-Am
'96 Elantra GLS
"The shortest distance between two points is a straight line........but, it's not as much fun."
<img src="http://www.speedcraving.com/i8acobra/flag.gif">
 
1 - 7 of 7 Posts
Top