Hyundai Forum: Hyundai Performance Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
2,951 Posts
Discussion Starter #1
I just took of my door panels for those who would like to know how this is how you do it for the elantra.

First, Take off your Window handle ( the device that makes your windows roll up and down, if you have a Automatic windows roller system then don't worry about it for now.)
Second, Take off you door opener, It will have one philps screw holding it on, after you take out the screw, gently, move it around tell the door opener device comes out of the door panel. Next, there will be two thick little wires comming from it, to take these of, slide the little plastic peice back so it will allow removal of the wire from the handle. Both these wires run on a track, they enable you to open and lock your door. After you get these wires of you can set it down on the ground, remember what screw it came with so you may use the same one when you put it back on. Next, take out your door handle itself ( the peice you used to shut the door with ) there is a screw inside there, take it out. Now for the door panel itself. There are little philips screws all around the panel. Take them out, when removing the door panel, Pull on it first to break it free of the door itself, then slide it upwords, this method should take it off. Now, you will see probably some plastic covering, remove it, this stuff is nasty, so becarefull, I recommend you not wear any nice clothes. If you wish you can take out your speakers aswell. They are easy just remove the screws that hold the speaker in place then disconnect the speaker wire.
Repeat this step for all doors.
After all door panels are off, put back on the window roller by just snapping back on, then put your door opener back on by placing the wires back in their proper positions, its a very simpe task. Enjoy my fellow racers!

-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
<img src="http://www.ballisticunlimited.com/koolart/images2/ford/P0640.jpg" border=0>
I'm a Ford Man With a Tuned Hyundai!
And for all you ricers out there! www.riceboypage.com Enjoy!
 

·
Registered
Joined
·
492 Posts
Woohoo more content for my site :)

http://webhome.idirect.com/~trini
 

·
Registered
Joined
·
2,951 Posts
Discussion Starter #3
Yeah, you can use it, just remember who wrote it.<img src=icon_smile_big.gif border=0 align=middle>

-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
<img src="http://www.ballisticunlimited.com/koolart/images2/ford/P0640.jpg" border=0>
I'm a Ford Man With a Tuned Hyundai!
And for all you ricers out there! www.riceboypage.com Enjoy!
 

·
Registered
Joined
·
281 Posts
make sure your windows are rolled up when you close the door or you run the risk of breaking them. its not fun.
 

·
Registered
Joined
·
138 Posts
Were you just removing them for fun? Are you painting them or installing new door speakers? About how much time did it take?

Stop honking I'm on the Phone!
 

·
Registered
Joined
·
2,951 Posts
Discussion Starter #6
Removing them. for the same reason I removed my interior :)

-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
<img src="http://www.ballisticunlimited.com/koolart/images2/ford/P0640.jpg" border=0>
I'm a Ford Man With a Tuned Hyundai!
And for all you ricers out there! www.riceboypage.com Enjoy!
 
1 - 6 of 6 Posts
Top