[KellyC]

I was just wondering what the biggest size i should go that wouldn't result in in actual power loss. I have a 00 Accent with the 1.5L with only a K&N Dropin filter and Custom CAI

Please Help


<hr noshade width=60% size=1 align=left>

 

[AUTOBOT]

No bigger than 2.25" but a 2" will be fine.<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left><b>I absolutely positively abhor and verbally bitchslap anyone who starts quoting me their entire car mods as some sort of "Stage".~RED~</b><img src=/images/forums/snitz/wink.gif width=15 height=15 border=0>

<b>WHAT THE F(*)&^#@(*^ IS UP WITH EVERYONE QUOTING OTHERS IN THEIR SIGNATURE??~Nikki~</b>

 

[KellyC]

Which one will you notice more gain on??
2" or 2.25"????<img src=/images/forums/snitz/uhh.gif width=15 height=15 border=0>

Cuz i will be pissed <img src=/images/forums/snitz/mad.gif width=16 height=16 border=0>if i pay big bucks to get one custom made and end up with ****


<hr width=60% noshade size=1 align=left>

 

[skierd]

Well, the 2" will give a more even power gain, while the 2.25" will have the hp gain mostly in the higher revs, and will be better with header, intake, and other n/a mods.


<hr width=60% noshade size=1 align=left><b>KORE Crew #19</b>

"It's not the contest between racers that really matters, but the abstract dialogue between the soul of a racer and his machine." -Racer X

 

[MySilverTiburon]

go 2.25 if it's crush bent.....2" if mandrel bent

cuz if crush bent, at the bends, it will be smaller which has same effect as having smaller mandrel bent piping


<hr width=60% noshade size=1 align=left><img src="http://members.aol.com/mysilvertiburon/images/tiburon%20mst%20(s).jpg" border=0>

 

[KellyC]

What Are the LC's Currently running stock??<img src=/images/forums/snitz/oogle.gif width=15 height=15 border=0><img src=/images/forums/snitz/oogle.gif width=15 height=15 border=0><img src=/images/forums/snitz/oogle.gif width=15 height=15 border=0><img src=/images/forums/snitz/oogle.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>It's Not A Honda, Its A Hyundai

 

[skierd]

1.5" or something pitiful like that...<img src=/images/forums/snitz/disapprove.gif width=15 height=15 border=0>

Pipes are too damn small for a dirt bike. I almost cried when I first saw them. But at least it means u are getting more power for your money.

And you could still go with 2.25" mandrel bends, as the less restriction will aid for when u have more mods (intake, BTB, BIM, Cams, Header, S-AFC).


<hr width=60% noshade size=1 align=left><b>KORE Crew #19</b>

"It's not the contest between racers that really matters, but the abstract dialogue between the soul of a racer and his machine." -Racer X