Hyundai Forum: Hyundai Performance Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
168 Posts
Discussion Starter · #1 ·
Okay, my broke a*s has finally decided to start my project. I had finally decided an KORE's intake, (but now I have been thrown for a curve again, with talk of a version 3) I assume will be much better? What exhaust would work best? I have looked at many universal exhausts that are priced really good, and boast big power(I am doubtful). Just wanted some of your guys input...

Also, I plan to t/c my car over the next year, so is there a better exhaust to get in preparation for that? <img src=/images/forums/snitz/cry.gif width=16 height=16 border=0>too many toys, not enough money!!!


<hr noshade width=60% size=1 align=left>I have the fastest Hyundai on the forum...

when I am asleep and dreaming...
 

·
Registered
Joined
·
137 Posts
intake note... what we have done is on early cars with the mass air flow sensor is remove it and incorperate that and the top boot into the intake design.... we also make it in one pc for most models now to also make it easier to install.........as far as exhaust ... the test exhaust for the KORE US Spec cat backs are on the way to us for the tib, 01 elantra and 01 accent. we will post pricing as well as photos as soon as they arrive. it sohould be close to other exhaust for say a eclipse or a honda in the market place. It is all stainless steel with a polished stainless steel rear section. We have almost every Hyundai app available to us pending changes for US spec models. and we already have the tuscani done ...

thanks
dan


<hr width=60% noshade size=1 align=left>
 

·
Registered
Joined
·
6,177 Posts
Hey Dan, How much for the Tuscani?

And how'd you make it w/o a vehicle released yet unless you have a secret lol


<hr width=60% noshade size=1 align=left>Jason Mann

Missouri/Kansas Rep.
Team-SR
 

·
Registered
Joined
·
168 Posts
Discussion Starter · #4 ·
Wow cool, I didn't even know Kore was working on an exhaust (I might just live in a cave after all). Well I guess I'll have to balance the ol' finances and see what we can do...<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>
So would version 2 or 3 be better for my 2k1 tib?


<hr width=60% noshade size=1 align=left>I have the fastest Hyundai on the forum...

when I am asleep and dreaming...
 

·
Registered
Joined
·
137 Posts
dude we have a lot done and we have been waiting due to health problems and $$$ problems caused by the health problems.... but now it is time to act. i got people talking trash about the quality etc...and that has made me move into action......
We have a lot of stuff no one has seen and we are waiting for the production items to get here to post photos. We have teamed up for our headers and exhaust with one of the leading manufacturers of the top Japanese brands and they are producing our exhaust to US Specs solely for us. The exhausts are all Stainless steel with laser cut flanges and all factory hanging points. The mufflers are all stainless with stainless and ceramic packing materials inside. We have exhaust for almost all models being done and we have Accent. Elantra, 01 Elantra, Tiburon(all), Sonata (rr section) XG (rr section) Tuscani and also KIA models. Our stainless steel US Spec headers are all race built units that are on over half of the ventus cup tiburons in KOREA. The guy working with me is a three time KATA (racing organization) National Champion. They will retail for under 500.00 for most models excluding tuscani 6 cyl.

watch for more info soon

thanks
dan<img src=/images/forums/snitz/oogle.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>
 

·
Registered
Joined
·
1,125 Posts
sorry this is not because of KORE, we're working with the designer to finish, but some other things he asked for, I have given a final date, if not, I'm sorry but I'm taking over this part, Dan is already looking for options, I want this as much as everyone else, no hard feelings towards web designer now, just hope he's ok, when I take over this part, cause I won't wait longer... <img src=/images/forums/snitz/disapprove.gif width=15 height=15 border=0> sorry, hopefully by the time the STORE goes up than we'll be up by then...


<hr width=60% noshade size=1 align=left>
 

·
Registered
Joined
·
1,673 Posts
<BLOCKQUOTE id=quote>quote:<hr height=1 noshade id=quote>
dude we have a lot done and we have been waiting due to health problems and $$$ problems caused by the health problems.... but now it is time to act. i got people talking trash about the quality etc...and that has made me move into action......
We have a lot of stuff no one has seen and we are waiting for the production items to get here to post photos. We have teamed up for our headers and exhaust with one of the leading manufacturers of the top Japanese brands and they are producing our exhaust to US Specs solely for us. The exhausts are all Stainless steel with laser cut flanges and all factory hanging points. The mufflers are all stainless with stainless and ceramic packing materials inside. We have exhaust for almost all models being done and we have Accent. Elantra, 01 Elantra, Tiburon(all), Sonata (rr section) XG (rr section) Tuscani and also KIA models. Our stainless steel US Spec headers are all race built units that are on over half of the ventus cup tiburons in KOREA. The guy working with me is a three time KATA (racing organization) National Champion. They will retail for under 500.00 for most models excluding tuscani 6 cyl.

watch for more info soon

thanks
dan<img src=/images/forums/snitz/oogle.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote>

Can't wait!!!!!
Can it be installed ourselves?(bolt up/no welding)


<hr width=60% noshade size=1 align=left>2001 Hyundai Tiburon FX 5-Speed Cardinal Red <img src="http://www.plauder-smilies.de/devil/firedevil.gif">
Just bought it so there are no mods :)

Future mods:
Shortshifter
Cams
Ram Air Intake
Exhaust (headers->muffler)
BBTB -> IM
 

·
Registered
Joined
·
5,617 Posts
<img src=/images/forums/snitz/smile.gif width=15 height=15 border=0>me so happy!!!<img src=/images/forums/snitz/smile.gif width=15 height=15 border=0>
can't wait<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left><img src="http://samadjawed.freeservers.com/images/frontview_garage.jpg">
 
1 - 9 of 9 Posts
Top