Hyundai Forum: Hyundai Performance Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
120 Posts
Discussion Starter #1
Im in jersey, anyone know a shop that does this around my area? I just lost my liscense for 6 months so im thinking about really getting into the motor, i really don't have to worry about downtime.<img src=/images/forums/snitz/cry.gif width=16 height=16 border=0>


<hr noshade width=60% size=1 align=left>A message to the honda camp, we're coming.
 

·
Registered
Joined
·
97 Posts
extruse hone out in irwin,pa. i got a price quote on my intake manifold and it was 395 bones. i lice about 45 minutes away. you can find out info at www.extrudehone.com

keep on tuning


<hr width=60% noshade size=1 align=left>
 

·
Registered
Joined
·
1,673 Posts
KORE mentioned that he's coming out with a NEW Intake Manifold. I'd wait and see how that turns out. Maybe it will be cheaper <b>AND</b> have better flow ability.<img src=/images/forums/snitz/wink.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>2001 Hyundai Tiburon FX 5-Speed
Just bought it so there are no mods :)

Future mods:
Shortshifter
Cams
Ram Air Intake
Lightened Hood
Exhaust (headers->muffler)
BBTB
 

·
Registered
Joined
·
120 Posts
Discussion Starter #4
Is KORE making the manifold for the accents?


<hr width=60% noshade size=1 align=left>A message to the honda camp, we're coming.
 

·
Registered
Joined
·
14,259 Posts
im just wondering if you even know what extrude honing does. have you looked into it, to see if it is even a worthwhile mod to do on a nearly stock car? if not i suggest you read up on it before you blow all that cash on it. <img src=/images/forums/snitz/wink.gif width=15 height=15 border=0> you will get much better gains doing other things.


<hr width=60% noshade size=1 align=left><img src="http://63.102.174.92/rudy_mini2.jpg" border=0>
my car is yellow. [email protected]
 

·
Registered
Joined
·
120 Posts
Discussion Starter #6
Rudy, i know very well what extrude hone does, my boys mustang enjoyed it very much. Over the winter im gonna install a CAI, header, BBTB, port match the IM, and get it extrude honed. Throw a little fuel pressure on it, and i think the car will be happy, too.<img src=/images/forums/snitz/moon.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>A message to the honda camp, we're coming.
 

·
Registered
Joined
·
14,259 Posts
your friends rustang is also a 5.0L, your accent is a 1.5L. i'm just making sure you know what's going on before you spend all that money <img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left><img src="http://63.102.174.92/rudy_mini2.jpg" border=0>
my car is yellow. [email protected]
 

·
Registered
Joined
·
6,344 Posts

·
Registered
Joined
·
120 Posts
Discussion Starter #9
Yo, personally i think i could expect around 5-7hp from this mod. Throw in a nice BBTB and a portmatched IM, and that would be hot, there would be no more bottlenecks from the filter to the valves. want proof that this would make horse? Look at the quad throttle body mod and the horse power expected from that, all because the thing flows alot better. Well im not about to spend $1500 on that, so i'll just have to deal with the port job.


<hr width=60% noshade size=1 align=left>A message to the honda camp, we're coming.
 

·
Registered
Joined
·
14,259 Posts
i know it would work, b/c i've seen an accent with it done, but he also has extensive engine mods done too. he is putting around 180 to the wheels all motor.


<hr width=60% noshade size=1 align=left><img src="http://63.102.174.92/rudy_mini2.jpg" border=0>
my car is yellow. [email protected]
 
1 - 10 of 10 Posts
Top