Hyundai Forum: Hyundai Performance Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,285 Posts
Discussion Starter · #1 ·
I was wondering who sells Forged Pistons but dont cost a fortune.I know RED has the overbore ones but im just looking for drop in Piston.
As you know my motor is the 1.8L and was wondering if i should get a 2.0L block from the scrap yard to put the Forged pistons in,or should i get the 1.8L Pistons or 2.0L Pistons and bore out my Block to a 2.0L displacement.


<hr noshade width=60% size=1 align=left>
 

·
Registered
Joined
·
1,285 Posts
Discussion Starter · #4 ·
4Door!!
The Bore on both the 1.8L and 2.0L are the same.The strock is whats different.
I understand when you get new Forged Pistons you have to claen the walls,this is what i meant by drop in Pistons!!
Since the bore is the same then i can get the 2.oL Pistons.Where is the cheapest or best place that makes it for our Tibby!
While im there i should change the Rods and believe Crowder makes them for our Tibs!!
Any help would be appreciated<img src=/images/forums/snitz/approve.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>
 
1 - 2 of 2 Posts
Top