Hyundai Forum: Hyundai Performance Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
176 Posts
Discussion Starter #1
So i know how to wire them to have constant on feature or the only on while the signal is on.. BUT is there a way i can wire em to be on.. then blink when i have the signal on? do i just tap into each +wires? i dont wanan blow anything up

someone help me out.:nervous:
 

·
Registered
Joined
·
158 Posts
It is more likely you will blow a fuse first. If you do STOP. you dont know enough to go on. tape it back together.
 

·
Registered
Joined
·
427 Posts
Take the GROUND wire from the side marker, and splice it to the POWER wire of your turn signal.
Then it will be on with the running lights and blink with the turn signal.
 

·
Registered
Joined
·
176 Posts
Discussion Starter #4
so ground from side marker to power from signal and
the power from side marker to power from constant lights?
 

·
Registered
Joined
·
427 Posts
Originally posted by Excel2NR
[body]
so ground from side marker to power from signal and
the power from side marker to power from constant lights?
[/body]
Yes, this will have the side markers on as long as the runninglights are on, but when you turn on the turn signal,the sidemarker will flash opposite the turn signal.

This is how several of my vehicles were wired from the factory,so when I get one that isn't, I usually do this simple mod.
 

·
Registered
Joined
·
176 Posts
Discussion Starter #6
so havn both hookd up to power isnt gona blow anything up haha
 

·
Registered
Joined
·
1,787 Posts
I'm looking to do the same with my 04 Accent but also i wanted to clear out my side markers and the turn signal in the bulb to get clear corners. Does anyone know how to do that. i heard someone put there light in an oven? Read about it:

http://www.hyundaiperformance.com/forums/topic.php?t=58030
 
1 - 7 of 7 Posts
Top