Hyundai Forum: Hyundai Performance Forum banner

1 - 20 of 24 Posts

·
Registered
Joined
·
34 Posts
Discussion Starter #1
I have a 2000 tib for sale. Its got 78000 miles. It has never been wrecked or flooded or anything. The motor runs perfect, the trans needs new clutch, pressure plate, throwout bearing, and slave cylinder. This car has custom 2.5 in cat back exhaust (the second cat is removed, but I have the old pipe), diy cold air intake, 225 50 15s all around. It comes sith an UNINSTALLED TDO5H turbo and custom OBX manifold (welded together). THis would be an excellent parts car, or an even better project car. I am only getting rid of it because i am tired of working on it, and I just bought an SRT4. Also, I'm moving in about 2 months, so I'm looking to get rid of it quick. 2000 or best offer for the whole package. Email me for pics or more info.

[email protected]
 

·
Registered
Joined
·
34 Posts
Discussion Starter #4
Sorry bout that. I live in eastern NC, but I am moving to south eastern NY. I will post pics as soon as i get my digital camera back. thanks
 

·
Registered
Joined
·
34 Posts
Discussion Starter #11
here they are.


http://www.hyundaiperformance.com/images/members/car/imgs/car3470_1.jpg
http://www.hyundaiperformance.com/images/members/car/imgs/car3470_2.jpg
http://www.hyundaiperformance.com/images/members/car/imgs/car3470_3.jpg
http://www.hyundaiperformance.com/images/members/car/imgs/car3470_4.jpg
http://www.hyundaiperformance.com/images/members/car/imgs/car3470_5.jpg
http://www.hyundaiperformance.com/images/members/car/imgs/car3470_6.jpg
http://www.hyundaiperformance.com/images/members/car/imgs/car3470_7.jpg
http://www.hyundaiperformance.com/images/members/car/imgs/car3470_8.jpg
http://www.hyundaiperformance.com/images/members/car/imgs/car3470_9.jpg
http://www.hyundaiperformance.com/images/members/car/imgs/car3470_10.jpg
http://www.hyundaiperformance.com/images/members/car/imgs/car3470_11.jpg
http://www.hyundaiperformance.com/images/members/car/imgs/car3470_12.jpg
http://www.hyundaiperformance.com/images/members/car/imgs/car3470_13.jpg
http://www.hyundaiperformance.com/images/members/car/imgs/car3470_14.jpg
 

·
Registered
Joined
·
649 Posts
ok i am out. this is too much money at least from my point of view.
i'd add to the description that it needs a manifold, reciver/dryer adn compressor removed and knocking grindign sound
 

·
Registered
Joined
·
697 Posts
the best I'd give for this car would be $1000, I talked to the guy that saw in real life and he said it's way too messed up...
 

·
Registered
Joined
·
34 Posts
Discussion Starter #14
thats cool, your loss. it's ok though, i get to convince wife to keep it now. give me something to play with. thanks.. if anyone else is interested, i might be convinced for less than 2000$
 

·
Registered
Joined
·
3,943 Posts
why the hell did you weld the manifold to the turbo?!?!??!?!?!?!?!?!?

and what 'grinding' sound is it making?

youve caught my attention....
 

·
Registered
Joined
·
649 Posts
when i heard it it was not really grinding more like loud knocking comming form teh divetrain. Matt says its the throwout bearing and comming form the trans but itis very hard to tell and i forgot to get my stetoscope when i looked at it. if you put your hand on the trans as it idles can actully feel the pulsation from whatever is broken inside. as engine is reved up knocking dissapears but instant you let off the gas it comes back. junk yard who set matt that tranny has screwed him at least that's my guess
 

·
Registered
Joined
·
3,943 Posts
ok well i have rebuilt this tranny before, nothing earth shattering even if it has to be done.

al:

you say it needs a new manifold?? intake or exhaust and what was the problem?

whats 'reciever/dryer and compressor removed' you mean the air conditioning system? i could care less about A/C...

you say last year the tranny was replaced from a yard one?

does the knocking sound persist with engine revs even with the clutch depressed, or does the slave cylinder not work at all? he says it needs a slave, is it just leaking or non-functional?

Matt:

what happened to the original one that wasnt warrantied? and who did the replacement was it him or some 2bit shop or a friend or what?

(again) what posessed you to weld the turbo?

who 'custom welded' the turbo manifold? OBX or you took an OBX header and made it into a turbo one yourself?

what date are you moving/relocating so i can know exactly when you want it gone by.

matt email me so we can talk some more

al if its not too much of a burden please work with me on these few questions. also let me know how far you are from him and if you would be willing to check it out any further if i gave you a couple bucks or something. if its like 100 miles then dont worry about it its just that its about 900 miles for me to see for myself lol and i trust a service tech's diagnosis.

**edit**

also, if you have the engine running and clutch depressed can you run through all the gears including reverse? if teh clutch isnt working then can you find every gear with the car shut off or are there any gears that you cannot shift into? if i am not explaining it right, can you move the shifter from 1st gear to 2nd and so forth or will it not let you shift into 2nd gear or reverse or anything like that?

lasty (that i can think of right now) what brand are those lowering springs?

[Edited by beppomarx on Oct 1, 2004 1:31 PM]
 

·
Registered
Joined
·
2,187 Posts
If I was local I'd pay $1000 for it in a heartbeat. Everything should be an easy repair, even if it wasn't there's a LOT of good parts on that car. Hell it's got leather and ****. :D
 

·
Registered
Joined
·
219 Posts
HOOPTIE:) Just wondering why it has PA plates on it????
 

·
Registered
Joined
·
3,943 Posts
i didnt even notice the PA plates....

i assumed this one but you do have a legitimate title for this car right? if happen to drive down there and you try and hand me a smudged title that wont be good...
 
1 - 20 of 24 Posts
Top