[spoolin]

here is a picture of my gauge pod its a carbon fiber pod for a mitsu eclipse from autometer.

<img src="http://photos.netclubs.com/live/photos/photocenter/p/k/9/k/9k9hqv7hvjbkfa433c7fbd34cc/gaugepod.JPG" border=0>

2000 turbo tib

 

[SPIKE]

WHAT TURBO R U USING??

LOOKS GOOD<img src=icon_smile_big.gif border=0 align=middle>

Jason Mann

Missouri/Kansas Rep.
Team-SR

 

[Shadohh]

two questions bro.

What year mitsu is that gauge pod from?
like 95-99 ?

does it fit well without major mods?

2. I got that same a/f ratio gauge, can you tell me what wires you connect the 3 from the guage to?

<img src="http://www.deedlit.org/pwrbyhonda.jpg" border=0> <bumper sticker> "Powered by HONDAS! I eat them every time"

 

[KayJai]

Did you just bolt / screw the pod onto the existing A Pillar?

<img src="http://www.fxtreme.org/members/KayJai/kayjaitib.jpg" border=0><img src="http://www.fxtreme.org/members/KayJai/silverflame.gif" border=0>

<b>-KayJai- Manitoba <i>K.O.R.E.</i> Coordinator</b>
http://www.fxtreme.org/members/KayJai/index.html

 

[spoolin]

Hey guys in response to the questions im running a mitsu TDO5H big 16G ported and clipped turbo its the godzilla model from turbochargers.com The gauge pod fit without any modification its from a 98 eclipse and its held on by two screws to the stock pillar. As far as the air/fuel ratio gauge the power and ground can be grabbed from any source on the ignition switch and the O2 signal come from either the black wire from the 02 sensor or the green and white wire on pin 12 on the ecm harness.

2000 turbo tib

 

[Rudy]

do tell more of your turbo setup. <img src=icon_smile_wink.gif border=0 align=middle>

<img src="http://63.102.174.92/rudy_mini2.jpg" border=0>
my car is yellow. [email protected]

 

[Shadohh]

Thanks Spoolin exactly what I needed to know


<img src="http://www.deedlit.org/pwrbyhonda.jpg" border=0> <bumper sticker> "Powered by HONDAS! I eat them every time"

 

[spoolin]

Shaddoh glad i could help one thing i forgot to mention is that hyundai seems to have no loyalty to wire color even the service manual doesnt always have the right color so if you do use the ecm make sure to count the pins.

<img src="http://photos.netclubs.com/live/photos/photocenter/p/k/9/k/9k9hqv7hvjbkfa433c7fbd34cc/signature3.jpg" border=0>

 

[zoraks_tibby]

Thanks for sharing the info it looks great. You had no problems when installing the gauges other than the wire colors?

 

[Shadohh]

I noticed then when wiring in my start button


<img src="http://www.deedlit.org/pwrbyhonda.jpg" border=0> <bumper sticker> "Powered by HONDAS! I eat them every time"