[Shadohh]

<img src="http://deedlit.org/manifold.jpg" border=0>
<img src="http://deedlit.org/downpipe.jpg" border=0>
<img src="http://deedlit.org/turboexhaust.jpg" border=0>
<img src="http://deedlit.org/wrongsize.jpg" border=0>

::Mews:: Why wont this fit?
It suppose to be a t25 and a champion autosports manifold, suppose to fit t25/t3/ and t28s



<hr noshade width=60% size=1 align=left><img src="http://www.deedlit.org/pwrbyhonda.jpg" border=0> <bumper sticker> "Powered by HONDAS! I eat them every time"

 

[Turbowgn]

That is a Maniflod for a T3/T4 Turbo. None of the Mitsu Turbo's will fit that Manifold. IF I was you I would sell the Turbo and get a Garrett T3/T4 from www.turbochargers.com Brand New for $450. It's not that bad of a price and I know you really don't want to have to do that, but IMHO that would be best for you in the long run.

Here is a pic of the T3/T4
<img src="http://www.turbochargers.com/currentspecials/MVC-001S.JPG" border=0>


<hr width=60% noshade size=1 align=left><img src="http://www.speed-factor.com/Tim_Motor1_small.jpg" border=0> <img src="http://www.speed-factor.com/Tim_Side1_small.jpg" border=0>

14psi Daily Driven!!!!

For Pictures Visit http://www.speed-factor.com/hyundai4g63T.html

 

[Turbowgn]

Do you have a pic of the Top of the Manifold. Does it have a flange welded on it for a External Wastegate? Cause with the T3/T4 you will need to run a External Wastegate which might be better for you install, cause with a External Wastegate you can have alot lower psi set on it that the stock 9psi on the Mitsu Turbos.<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0 align=middle>


<hr width=60% noshade size=1 align=left><img src="http://www.speed-factor.com/Tim_Motor1_small.jpg" border=0> <img src="http://www.speed-factor.com/Tim_Side1_small.jpg" border=0>

14psi Daily Driven!!!!

For Pictures Visit http://www.speed-factor.com/hyundai4g63T.html

 

[Shadohh]

Its jsut hot exhaust gas, can I fashiomn up and adaptor plate?


<hr width=60% noshade size=1 align=left><img src="http://www.deedlit.org/pwrbyhonda.jpg" border=0> <bumper sticker> "Powered by HONDAS! I eat them every time"

 

[russotib]

im doing that...
i need to create a connector plate to join my turbo with the manifold i got (from a 2gen eclipse turbo)
also i'll like to say that here in dominican republic theres a tib. with 8psi boost and no intercooler and sometimes he runs 12psi<img src=/images/forums/snitz/wink.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>blow is the way to go.....

 

[Shadohh]

wow

I found another manifold that will fit better, using that


<hr width=60% noshade size=1 align=left><img src="http://www.deedlit.org/pwrbyhonda.jpg" border=0> <bumper sticker> "Powered by HONDAS! I eat them every time"