Hyundai Forum: Hyundai Performance Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
192 Posts
Discussion Starter #3
sorry 2000 sonata with a 2.1 dohc something like that i dont own the motor so i cant tell off hand
 

·
Registered
Joined
·
168 Posts
Installing cylinder head (with replacing head bolts)
STEP
OPERATION
REMARKS

1
TIGHTEN TO 20Nm (200kg.cm, 14Lb.ft)
CARRY OUT IN THE ORDER SHOWN IN THE ILLUSTRATION

2
TIGHTEN 90° OF A TURN
IN THE ORDER SHOWN IN THE ILLUSTRATION. MARK THE HEAD OF THE CYLINDER HEAD BOLT AND CYLINDER HEAD BY PAINT.

3
FULLY LOOSEN
CARRY OUT IN THE REVERSE ORDER OF THAT SHOWN IN THE ILLUSTRATION.

4
TIGHTEN TO 20Nm (200kg.cm,141b.ft)
CARRY OUT IN THE ORDER SHOWN IN THE ILLUSTRATION

5
TIGHTEN 90° OF A TURN
IN THE ORDER SHOWN IN THE ILLUSTRATION. MARK THE HEAD OF THE CYLINDER HEAD BOLT AND CYLINDER HEAD BY PAINT.

6
TIGHTEN 90° OFF TURN
IN THE ORDER SHOWN IN THE ILLUSTRATION. CHECK THAT THE PAINTED MARK OF THE HEAD BOLT IS LINED UP WITH THAT OF THE CYLINDER HEAD.
 
1 - 4 of 4 Posts
Top