[xgkraverx]

well i saw some dude online that made a kit in his garage. his page link is http://www.geocities.com/silverkit98 this car is sweet. i was wondering if anyone had opinions on doing this. everyone knows its hards to get kits for hyundais especially accent. thanks

*17 inch rims
*clear corners
*black mesh grill
*mini intake
*exhust muffle
*coil overs (coming soon)

 

[Visionz]

Holy Crap!!!! That's pretty freaking sweet! The only question is..how did he attach everything? I'm guessing he used both 3M double sided tape, and small rivet screws. I think I'm gonna have to do that with side skirts. I can't really find any that I like alot, so if I design my own..then I know I'll be 100% happy with them! <img src=icon_smile_big.gif border=0 align=middle>

--------------------
<img src="http://www.fxtreme.org/members/2000Lo&ShowTibby/loandshow.gif" border=0>

<b>There is nothing like returning to a place that remains unchanged to find the ways in which you yourself have altered.</b>

 

[Decrum]

Very nice!

<img src="http://animations.fg-a.com/domincnC.gif" border=0>
www.geocities.com/decrum1

 

[yellowtiburon]

damn, that is sweet. that must save you a tone of money making your kit out of foam. i think i might try that for the front of my car if i ever have the time. nothing major, just some ground effects or something. how would you make it stay on?

 

[Happy Noodle Boy]

jeebus that looks nice. i was gonna go for a gtr kit, but damn! i just might make a lil sum'n sum'n by myself <img src=icon_smile_big.gif border=0 align=middle>

it looks like i'm wearing pants... but i'm not!

 

[jrh382]

Wow. That is really cool. He must be a sculpter or something. I can't imagine myself doing that. It would come out all lumpy and uneven. Probably fall off too! <img src=icon_smile_approve.gif border=0 align=middle> But that is amazing. Mad props goes to that guy.

2000 Black Hyundai Elantra GLS

 

[AUTOBOT]

I don't know about the rest of you but remember 2kLo has alot of experience with custom body work. It is not easy to buld your own kit so if you have not done it before or anything like it then you might want to reconsider going out and buying a bunch of fiberglass<img src=icon_smile_dead.gif border=0 align=middle>

<img src="http://www.transfans.com/logospin.gif" border=0><img src="http://www.coreyandjayshow.com/pee.gif" border=0><img src="http://www.hyundaiperformance.com/upload/binladen.jpg" border=0>

 

[Happy Noodle Boy]

valid point there... worst comes to worst, i can always replace the tiburon emblem with one that says quasimodo <img src=icon_smile_big.gif border=0 align=middle>

it looks like i'm wearing pants... but i'm not!

 

[Patriot]

I emailed that guy and invited him over here. I would encourage you to do the same.

Stop honking I'm on the Phone!

 

[xgkraverx]

im on it. i have convinced him to check out the forums and stuff and trying to convince him to set up a mini shop to make kits for all of us, ehhe. he will charge abotu the same for other ktis btu u will be custome made so its cool.

*17 inch rims
*clear corners
*black mesh grill
*mini intake
*exhust muffle
*coil overs (coming soon)

 

[SilverKit]

Hey guyz... I'm here!!!<img src="http://www.geocities.com/silverkit98/silverkit.JPG" border=0>

http://www.geocities.com/silverkit98

 

[Doc]

<BLOCKQUOTE id=quote><font size=1 face="Verdana, Arial, Helvetica" id=quote>quote:<hr height=1 noshade id=quote>
Hey guyz... I'm here!!!<img src="http://www.geocities.com/silverkit98/silverkit.JPG" border=0>

http://www.geocities.com/silverkit98
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana, Arial, Helvetica" size=1 id=quote>

Welcome and great job on the car!!!! I Know you will like it here!

<img src=icon_smile_big.gif border=0 align=middle><img src=icon_smile_big.gif border=0 align=middle><img src=icon_smile_big.gif border=0 align=middle>

Going from point A to point B in a Hyundai! I may be old school, but have been driving Hyundai's for many years!

 

[AUTOBOT]

Welcome to the forums<img src=icon_smile_big.gif border=0 align=middle>

Sorry but geocities will not allow you to link pics<img src=icon_smile_sad.gif border=0 align=middle>

<img src="http://www.transfans.com/logospin.gif" border=0><img src="http://www.coreyandjayshow.com/pee.gif" border=0><img src="http://www.hyundaiperformance.com/upload/binladen.jpg" border=0>

 

[ravdav]

okay, i am gonna do this as well... and finally get around to the full body kit and heat extractor to finish off my targa tib... then will come the turbo once it is nice and pretty

BUT, how did you attack it to the car? that's what I want to know double sided tape like lo n show said? or what, and how hard is it to mount it up and stuff??

and anyone have a garage i can use since i don't have one anymore hehe

 

[Patriot]

Silverkit welcome aboard!!!
Check out the other sites as well. I see you have some great engine mods too so post over there and see what you can find out. Your doing a great job.

Stop honking I'm on the Phone!

 

[Shark_Bit]

Welcome, and may I say your car looks very sweet.<img src=icon_smile.gif border=0 align=middle>

 

[Visionz]

<BLOCKQUOTE id=quote><font size=1 face="Verdana, Arial, Helvetica" id=quote>quote:<hr height=1 noshade id=quote>
I don't know about the rest of you but remember 2kLo has alot of experience with custom body work. It is not easy to buld your own kit so if you have not done it before or anything like it then you might want to reconsider going out and buying a bunch of fiberglass<img src=icon_smile_dead.gif border=0 align=middle><hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana, Arial, Helvetica" size=1 id=quote>

Hey man...exactly! I have alot of experience with fiberglass and I can tell ya..it's not fun or easy stuff to work with. It can be quite a pain in the ass. I took the Eclipse Wings West Aggressor kit and molded it to fit a Tib, and I had to do ALOT of fiberglass work for it to fit right. Unfortunately, I'm not gonna use it anymore and I'm getting something else real unique and different. But on any note..if anyone plans on either building their own kit, or using fiberglass at all..mess around with some spare pieces of an old car or old kit first. <img src=icon_smile_wink.gif border=0 align=middle> You'll be glad you did. <img src=icon_smile_clown.gif border=0 align=middle>

--------------------
<img src="http://www.fxtreme.org/members/2000Lo&ShowTibby/loandshow.gif" border=0>

<b>There is nothing like returning to a place that remains unchanged to find the ways in which you yourself have altered.</b>

 

[KnOcKeR]

**** man that's really nice what you did... nothing too complicated the way that you show it too... unfortunately, must not be that easy... btw, did you leave the foam in??

<img src="http://projectgsi.wtfisup.com/images/sig.jpg" border=0>
http://projectgsi.wtfisup.com
Now let's put those Honduhs to shame!!
***IR2 is an angel***

 

[ravdav]

where can I get big peices of foam and the fiberglass materials I need??

 

[SilverKit]

You can let the foam there or you can remove it. If you let the foam, the only thing is that your skirt will be stiffer and heavyer.
You can buy the foam in a home depot or a renovation center. The way you have a block of 6" of heigh, you must glue 3 sheet of foam (2" each) with water based contact glue. Then you may cut it and sand it.

Later

<img src="http://24.128.218.194:90/upload/accent/images/silverkitsmall.JPG" border=0>

http://www.geocities.com/silverkit98